Hey ya'll...I have followed the intruction in the service manual (20-49) on removing the bumper cover to the dot. But when it comes to #6, I AM STUCK!!!! AHHHHHHH Any suggestion?
Stuck on BUMPER Removal
- Thread starter PoohBEAR
- Start date
Hey ya'll...I have followed the intruction in the service manual (20-49) on removing the bumper cover to the dot. But when it comes to #6, I AM STUCK!!!! AHHHHHHH Any suggestion?
Step #6 is just to pull the bumper straight back. I can't see how you are having a problem with that. Does it seem loose at all?
i loosen it up....i pulled it...i looked what is holding it..i spent about 30mins shaking..........it won't come out. The upper part is holding it tight.
Briank said:
How many nuts did you remove inside the trunk? should be 8 of of them.
2 on each underside of the fender, and 2 in the trunk.....6 all together. Where is the other 2?
Briank said:
Correction: There are 2 in the trunk 2 under the trunk floor and 2 on each side under the under covers.
Brian,
Thanks so muchhhhhhhhhhh!!! I am going back out to the garage to verify and see if i can release it.
okay, I found 2 each side under the fender and 2 in the trunk....but i can't find the other 2 under the trunk floor....ahhhh..what page in the manual can i find these 2 suckers?
Thanks so muchhhhhhhhhhh!!! I am going back out to the garage to verify and see if i can release it.
Briank said:
okay, I found 2 each side under the fender and 2 in the trunk....but i can't find the other 2 under the trunk floor....ahhhh..what page in the manual can i find these 2 suckers?
Last edited:
There are 10 nuts to remove:
The two in the trunk;
There are four - two on each of the brackets that are approx 1/4 - 1/3 of the way in from each side;
There are four - two on each of the vertical stanchions of the brackets at the side.
You can see them on page 875 of http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991servman.pdf
(In my 93 manual it is 20-60; 20-49 in the 91 on-line)
The two in the trunk;
There are four - two on each of the brackets that are approx 1/4 - 1/3 of the way in from each side;
There are four - two on each of the vertical stanchions of the brackets at the side.
You can see them on page 875 of http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991servman.pdf
(In my 93 manual it is 20-60; 20-49 in the 91 on-line)
Similar threads
