I'm in the process of removing the stock radio and one of the screws is stripped. Technically, the screw head is fine, it's the speed clip that it screws on to that is stripped. The screw just keeps turning and won't tighten fully or loosen. I've tried pressing the back of the screw with a flat head screw driver while unscrewing from the front but no success. The threads won't catch. I've also tried slipping a razor blade between the head and the bracket in an effort to get it to bite but again no success.
Any suggestions?
*EDIT* Never mind, I got it out finally. I ended up putting a flat head screw driver between the screw head and bracket and twisted/lifted while unscrewing and was able to get the screw to bite.
Any suggestions?
*EDIT* Never mind, I got it out finally. I ended up putting a flat head screw driver between the screw head and bracket and twisted/lifted while unscrewing and was able to get the screw to bite.
Last edited:
