STMPO aluminum rear bumper - November sales price

[StmpoRaceProducts]

For the month of November we will be offering our lightweight rear bumper replacement for a discounted price of 300.00 plus shipping

information about the bumper can be found here..

http://www.nsxprime.com/forums/showthread.php?t=109363&highlight=stmpo

also a detailed discussion found on the wieght reduction thread found here...

http://www.nsxprime.com/forums/showt...ight+reduction

call down to the shop for a credit card order or pm/email for a shipped price

[email protected]

480-889-1483

Regards

 

[MANIACura]

This is a great product. I have one on my car. Saved a ton of weight and fit like a glove. Ross, do you have one for the front? I want an aluminum beam to replace the steel beam under the front bumper (the one the horns mount to.)

 

[sophis]

Order placed. Thank you for offering a great product Ross!

 

[StmpoRaceProducts]

Order placed. Thank you for offering a great product Ross!

Bumper is boxed and waiting for fedex... thanks for the biz... we have 2 left on the shelf at this price.

Regards

 

[sophis]

I finally installed the aluminum rear bumper and for the price and to save 15lbs on the far back of an NSX makes this an awesome product! Ross has been extremely helpful taking his time to answer all my questions. He definitely stands behind his products and makes sure the customer is satisfied. Will do business with again!

FYI, this is a pretty easy install. You do not need to remove the taillights for the installation.

 

[UnhuZ]

Hi,

are you sure the savings were 15lbs ?! if that is true, then i assume that the aluminium beam weights 0lbs, as i had the Steel heavy OEM rear beam and it weighted 15lbs, so the savings would only be 15lbs if no beam was installed...

i say this, because i'm sensible to all weight data :wink:

it would be nice to have the weight of that aluminium beam.

Thanks,
Nuno

 

[sophis]

I should have been more specific and say this is a 15lb saving over the oem US spec steel bumper beam which MANIACura weighed (link is in the first post) to be 23.7lb. The STMPO aluminum bumper weighs 8.8lbs so technically a 14.9lb weight saving.

 

[UnhuZ]

Hi,

sorry... i just thought the Steel bumper beam were the same in US and Europe...my bad

Thanks,
Nuno

I should have been more specific and say this is a 15lb saving over the oem US spec steel bumper beam which MANIACura weighed (link is in the first post) to be 23.7lb. The STMPO aluminum bumper weighs 8.8lbs so technically a 14.9lb weight saving.

 

[NSXEXY]

does this work with the foam insert?

 

[StmpoRaceProducts]

does this work with the foam insert?

Yes it does... it is a direct replacement of the steel beam using 100% of the other parts.

Regards

 

[John@STMPO]

New pictures up on the site!

:smile:

http://www.stmpo.com/product.php?productid=16150&cat=0&page=1