Steering wheel?

[VBNSX]

Ok, did the hard part of removing the old wheel, putting on the hub etc. here's the deal:

science of speed hub:
http://www.scienceofspeed.com/produ...s/NSX/ScienceofSpeed/steering_hub/default.asp

momo tuner wheel

As you can see the horn button falls right thru the hole.. I 'thought' it was supposed to 'stay' like this:

but alas:

I must be doing something really dumb... and the hub hole is the same size so it just goes right thru... i know i must be missing something painfully obvious...

any help would be greatly appreciated.
x

 

[evof575gtc]

you need to use a momo horn button retainer/grounding plate.

if you dont have it,
i have a few that i can give you as long as you pay shipping.

 

[VBNSX]

you need to use a momo horn button retainer/grounding plate.

if you dont have it,
i have a few that i can give you as long as you pay shipping.

message sent.. thank you for quick response...

odd that this didn't come with the wheel when i bought it

I didn't buy it from this vendor but what you see is what I got:
http://yhst-1408381693991.stores.yahoo.net/motustwhreds.html

 

[davidf]

I've had several Momos in the past and have noticed some horn buttons are different. Just an observation but they may have sent you the wrong horn button for that particular model wheel.

 

[VBNSX]

I've had several Momos in the past and have noticed some horn buttons are different. Just an observation but they may have sent you the wrong horn button for that particular model wheel.

well i figured since i was ordering from evo, i went ahead and got a honda button :tongue:

 

[jeffchai]

you need to use a momo horn button retainer/grounding plate.

if you dont have it,
i have a few that i can give you as long as you pay shipping.

OMG thats what i am missing. can i get one off you? i will pay shipping. please :biggrin:

 

[evof575gtc]

that ground/horn button retainer is intended for momo & sparco hubs.
works on the SOS and Dali hubs too, but not on the quick release hub kits.