Spoiler install issue..

[chippy]

So i bought a NSX-R style spoiler from a vendor here.

I got the oem spoiler off quite easy. The oem spoiler got the screws attached to the spoiler, but the new one dosent have that. It just got holes.

So am I missing something here? Am i supposed to remove the screws from the OEM spoiler, in that case, how?

 

[pingu81]

Did the new spoiler come with bolts? Look at the bottom of the new spoiler. Are the holes threaded?

 

[chippy]

No bolts was in the package, the holes are ready for a screw yeah, it got threads

I've contacted the vendor, but hoped for a quicker answer here.

 

[nigel]

Just get six, 6 x 15 mm bolts and if they're not shouldered bolt heads be sure and use standard 6 mm flat washers, adjusting for the proper bolt legnth.
May not be a bad idea to use some anti-sieze on the threads as well.

Cheers
nigel

 

[chippy]

Thanks for the info, as suspected the screws was forgotten in the package.

What size of screw should i get, i mean length.. and what about the "head" on screw?

 

[chippy]

It all worked out, thanx for the reply's!

 

[chippy]

The brake light connector that i ran through the rear windows garnish, the first thing that meets me is a "connection hub" where 2 wires go in, is this where my wires are supposed to connect?

My wires also just came total plan, i've read somewhere that i need some kind of metal connectors which slides into the "hub"