Source needed: Rear lower arm bushings

[Radarnyc]

new owner here and I’m looking for a source for OEM rear lower arm bushings or maybe the part# for that. Thanks much

 

[Honcho]

new owner here and I’m looking for a source for OEM rear lower arm bushings or maybe the part# for that. Thanks much

The OEM suspension bushings are not sold separately. You need to buy the entire assembly.

Companies like Science of Speed offer services where they press out the old bushings and press in aftermarket units. I would call them.

 

[Radarnyc]

What’s the general recommendation from people here. Go the route of SOS pressing new bushings? OEM? Mita? Other? Thanks much

 

[Honcho]

What’s the general recommendation from people here. Go the route of SOS pressing new bushings? OEM? Mita? Other? Thanks much

SOS only offer the rear beam bushings. Companies like T3TEC, KSP Engineering and RFY offer complete bushing sets. The least expensive option is to buy one of these sets and have a reputable shop press them into your existing suspension members. Still, it's not gonna be cheap. Your only other option is to buy all of the suspension components new from Honda and that's going to be at least $10,000. FWIW, the NSX Refresh Center does not press in new bushings. If you select suspension refresh in the menu, they replace all of the components.

 

[MexiRicer]

Can you please elaborate on which bushings you are needing?

 

[MexiRicer]

Here is an OEM rear lower arm that I just had vapor blasted. I’m assuming you need the circular bushing. Correct? It’s a two part assembly. The core and the cap. I should have some spares since I do offer bushings press services in my garage.