My 1991 is having some sound problems and I would like to upgrade from the old casette system to a new more powerful indash CD ststem. Does anyone have any advise on how I can do this without making the dash look hacked up?
Sound System
- Thread starter dhauer
- Start date
when I bought my NSX, the previous owner had already done an aftermarket stereo. I don't think there's any way around cutting up the dash (Dremel tool), but with a little textured black plastic (most audio stores should have some) you can fill in the ugly holes.
Dunno if this link will work, but here it is in my car before I took it out.....http://www.nsxprime.com/forums/showthread.php?threadid=19324
--SF
Dunno if this link will work, but here it is in my car before I took it out.....http://www.nsxprime.com/forums/showthread.php?threadid=19324
--SF
dhauer said:
No offense to the previous post but i think this is what your looking for.
http://scienceofspeed.com/products/interior_performance_products/NSX/center_console/
No offense taken 
I didn't even know those console products were available. Given the cash the previous owner spent on the system in my car (which I have systematically ripped out in favor of electronic simplicity and less tonnage), I'm surprised the aftermarket console wasn't used.
It is a bit pricey, but does appear to be well made.
But, for those out there that are looking for a less expensive alternative, a DIN sized head unit can be made to fit in the stock console with a little creativity.
Best, SF
I didn't even know those console products were available. Given the cash the previous owner spent on the system in my car (which I have systematically ripped out in favor of electronic simplicity and less tonnage), I'm surprised the aftermarket console wasn't used.
It is a bit pricey, but does appear to be well made.
But, for those out there that are looking for a less expensive alternative, a DIN sized head unit can be made to fit in the stock console with a little creativity.
Best, SF
Thanks
Thanks for the inputs. My next step is to the high end aftermarket shop where a friend of my son works. It sounds like the original Bose amps in the doors are OK so I just need to change the tuner/CD and add a super sub under the seats.
Thanks for the inputs. My next step is to the high end aftermarket shop where a friend of my son works. It sounds like the original Bose amps in the doors are OK so I just need to change the tuner/CD and add a super sub under the seats.
Re: Thanks
If you are going to change anything you have to get rid of the amps/speakers in the doors. If they haven't failed yet, they will. It is a given. I kept the stock radio and just upgraded everything else.
BTW, there are no speakers under the seats. There is a sub on the passenger footwell though.
dhauer said:
If you are going to change anything you have to get rid of the amps/speakers in the doors. If they haven't failed yet, they will. It is a given. I kept the stock radio and just upgraded everything else.
BTW, there are no speakers under the seats. There is a sub on the passenger footwell though.
You say your sound system is having problems in the opening post then subsequently that your door amp/speakers are fine - I would almost guarantee that the head unit is fine & the problem is in the bose amps.
Also, you will NEVER fit a sub under the seats - there's simply no room under there.
If you want to retain your stock head unit (& thus preserve integrity of your stock console) you can add an amp & speakers & sub, with custom box behind the seat or in the stock location in the passenger footwell. You will realize additional quality by also replacing the head however.
Here are some ideas to go with
http://www.nsxprime.com/forums/showthread.php?s=&threadid=19586
http://www.nsxprime.com/forums/showthread.php?s=&threadid=18717
Also, you will NEVER fit a sub under the seats - there's simply no room under there.
If you want to retain your stock head unit (& thus preserve integrity of your stock console) you can add an amp & speakers & sub, with custom box behind the seat or in the stock location in the passenger footwell. You will realize additional quality by also replacing the head however.
Here are some ideas to go with
http://www.nsxprime.com/forums/showthread.php?s=&threadid=19586
http://www.nsxprime.com/forums/showthread.php?s=&threadid=18717
SF944 said:No offense taken
I didn't even know those console products were available. Given the cash the previous owner spent on the system in my car (which I have systematically ripped out in favor of electronic simplicity and less tonnage), I'm surprised the aftermarket console wasn't used.
It is a bit pricey, but does appear to be well made.
But, for those out there that are looking for a less expensive alternative, a DIN sized head unit can be made to fit in the stock console with a little creativity.
Best, SF
The FRP console you see above is indeed a good piece. I am using it in my Alpine set up. While it is made well, like all custom pieces it is not a perfect fit. The end user will still need to do a lot of sanding and shaping to get a really nice fit. Because the fiber glass backing varies in thickness, youdo have to sand an shape to make it sit really even in your own car. Over all, I am happy with it since you don't have to cut up the original console whichis costly to replace if you ever sell the car and want to go back to all original.
Lots of good information
I have received a lot of good nformation and links to other resources. ... However, I need to clarify my previous post. I said that the amps were fine, what I should have said is that they do the job when they are working correctly. Right now they have a bad habit of emitting a loud "pop pop" from time to time, so a replacement will have to be completed. This can be the original or an upgrade. ... That is what started the whole idea of adding the indash CD, etc.
I have received a lot of good nformation and links to other resources. ... However, I need to clarify my previous post. I said that the amps were fine, what I should have said is that they do the job when they are working correctly. Right now they have a bad habit of emitting a loud "pop pop" from time to time, so a replacement will have to be completed. This can be the original or an upgrade. ... That is what started the whole idea of adding the indash CD, etc.
The popping is associated with the failing caps in the Bose amps - they are repairable/rebuildable & even possible DIY if you can handle a soldering iron. You can find lots of info on the board if you search for Bose amp repair.
Also, I see you are local Bay area dhauer - more than welcome to check out my system first-hand. Be sure to come to our next local meet - see the Northwest forum for details. Several local members have after-market systems you can review.
Also, I see you are local Bay area dhauer - more than welcome to check out my system first-hand. Be sure to come to our next local meet - see the Northwest forum for details. Several local members have after-market systems you can review.
Similar threads
