any chance someone can supply me with the dyi for the seat removal? The one i found the pics are just red "x"s which dont help much. I am going to install the replacement Dali cushion and could use some detailed instructions. Thanks again.
seat removal
- Thread starter newjerseynsx
- Start date
did you review this thread? esp the link in post 2 http://www.nsxprime.com/forums/showthread.php?t=80690&highlight=install+dali+seat+cushion
thanks for the link, I did find that but was looking for something with pics. Anything?
You don't need pics, just the search.
http://www.nsxprime.com/forums/showthread.php?t=25607&highlight=Remove+seat
http://www.nsxprime.com/forums/showthread.php?t=25607&highlight=Remove+seat
Don't forget to put some thin grease on the rails and long screwy thing that makes the seat go back and forth. Will make the seat motor last forever!
shawn110975
Suspended
first start off by removing the 4 bolts holding the seat on the car, the 2 rear bolts have covers over them so use a flathead screwdriver to remove,, then lift the seat up from the front, this will expose the power harness for the seats, lift seat on its side,, to expose the seatbelt bolt,, remove,, lift seat up and out of car, your done!!
Similar threads
