Hello,
I wanted to see if there are any members located in, or somewhat close, to SLO.
We had a plan a few years ago to try to get some side bolster protectors made by a guy who fabricates them for different makes of cars.
He's located in SLO, and requested for someone with an NSX to stop by so he can make measurements.
If you have some time, it would be greatly appreciated.
Here is the original link to the thread. Check the 4th page on.
http://www.nsxprime.com/forum/showt...Protectors/page4?highlight=side+bolster+yawwn
Here is the product:
http://www.wattsmotoringaccessories.com/applicationguide.html
Looks like a great deal at $79 for a pair.
Thanks!
- - - Updated - - -
Hey Guys,
This looks promising. I'm not sure how easy or hard it is to take out the back seat cushions, but these look similar to the ones that Motegi used to sell, except that it goes all the way across versus just around the left and right side bolsters.
Anyone try taking out the center back seat cushions?
It's Option 1. The price is $60 from the forums.
http://www.corvetteforum.com/forums...otection-now-on-sale-starting-at-47-99-a.html
Option 2 is the same thing as what I referenced above (the guy who makes these chaps that go around the side bolsters and near the center top below the headrests). This one is about $80 from the maker.
Either one would make a good solution for our wear problem.
Any thoughts? Anyone able to go to SLO with their NSX?
Thanks.
I wanted to see if there are any members located in, or somewhat close, to SLO.
We had a plan a few years ago to try to get some side bolster protectors made by a guy who fabricates them for different makes of cars.
He's located in SLO, and requested for someone with an NSX to stop by so he can make measurements.
If you have some time, it would be greatly appreciated.
Here is the original link to the thread. Check the 4th page on.
http://www.nsxprime.com/forum/showt...Protectors/page4?highlight=side+bolster+yawwn
Here is the product:
http://www.wattsmotoringaccessories.com/applicationguide.html
Looks like a great deal at $79 for a pair.
Thanks!
- - - Updated - - -
Hey Guys,
This looks promising. I'm not sure how easy or hard it is to take out the back seat cushions, but these look similar to the ones that Motegi used to sell, except that it goes all the way across versus just around the left and right side bolsters.
Anyone try taking out the center back seat cushions?
It's Option 1. The price is $60 from the forums.
http://www.corvetteforum.com/forums...otection-now-on-sale-starting-at-47-99-a.html
![a70924dda6d2bb01806dab663afdf44b.jpg](/proxy.php?image=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160120%2Fa70924dda6d2bb01806dab663afdf44b.jpg&hash=f260a0f4c2cb003c17a14e27401106ee)
![ad0ad2500358d1163f5b35b1b9e13042.jpg](/proxy.php?image=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160120%2Fad0ad2500358d1163f5b35b1b9e13042.jpg&hash=2da72bdd8c43b9d0b32e0548d55ad7a1)
![3279c116b810d0459ed4f13f64b3c60e.jpg](/proxy.php?image=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160120%2F3279c116b810d0459ed4f13f64b3c60e.jpg&hash=c6831d64fd8e1b6622cfc5ca4a94b446)
Option 2 is the same thing as what I referenced above (the guy who makes these chaps that go around the side bolsters and near the center top below the headrests). This one is about $80 from the maker.
![893e400281c46aa12c073110a3538840.jpg](/proxy.php?image=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160120%2F893e400281c46aa12c073110a3538840.jpg&hash=cc4062e5c0fe342e91dfd093bec5963e)
![2387fc0f92452269e53938c5115e9481.jpg](/proxy.php?image=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160120%2F2387fc0f92452269e53938c5115e9481.jpg&hash=253cc14b809d151e349bca6796384048)
Either one would make a good solution for our wear problem.
Any thoughts? Anyone able to go to SLO with their NSX?
Thanks.
Last edited: