Selling my S2000 steering wheel and related hubs and adapters for mounting to the NSX. This allows for a direct bolt on to the car and is completely reversible. This was probably one of favorite modifications to the car. I originally wanted it for cosmetic reasons but after installing everything was even happier with how it improved the feeling of the car. The larger grip diameter and smaller steering wheel diameter make steering the NSX feel more like a modern car IMO.
As mentioned in my build thread, the hub adapter is based off of Hagasan’s design but CADed by myself and CNCed locally in conjunction with the s2000 steering wheel for a perfect fit (this wasn’t just drilled by hand). I made this as a one off because Hagasan’s were no longer in production and am selling it because I no longer have my NSX.
Good things to know:
- You’ll need to wire your factory harness to the s2000 airbag for it to work. The two connectors are not compatible so you’ll either need to change the connectors on both ends, or put an NSX airbag connector on the S2000 airbag (best idea IMO since you don’t damage the original NSX wiring harness) or put an S2000 connector on the NSX’s wiring harness
- You’ll need to figure out the wiring for the cruise control to make it functional. Given that its only a few wires I don’t think this should be too difficult.
- For more information please see Hagasan’s thread
What’s included:
- 2005 AP2 S2000 steering wheel with modifications made for mounting (has some wear marks on the wheel, please see photos for closeups)
- Single stage airbag (excellent cosmetic condition)
- Custom machined hub that connects to the SoS hub
- Science of Speed rapid steering short hub
- Required mounting screws
Build thread here with photos of the install:
http://www.nsxprime.com/forum/showthread.php/176307-S2000-Steering-Wheel
Hagasan’s original thread with more information:
http://www.nsxprime.com/forum/showthread.php/137183-S2000-RSX-Steering-Wheel-Adaptors
Photo of parts included: https://www.dropbox.com/s/mtrv7g2w2z2iusx/DSC03397R.jpg?dl=0
Closeup photos:
https://www.dropbox.com/sh/vnwhlf6o931i64j/AAB0e433F4JP8GDbyQ8WuLdna?dl=0
Asking $1000 including shipping and PayPal fees.
As mentioned in my build thread, the hub adapter is based off of Hagasan’s design but CADed by myself and CNCed locally in conjunction with the s2000 steering wheel for a perfect fit (this wasn’t just drilled by hand). I made this as a one off because Hagasan’s were no longer in production and am selling it because I no longer have my NSX.
Good things to know:
- You’ll need to wire your factory harness to the s2000 airbag for it to work. The two connectors are not compatible so you’ll either need to change the connectors on both ends, or put an NSX airbag connector on the S2000 airbag (best idea IMO since you don’t damage the original NSX wiring harness) or put an S2000 connector on the NSX’s wiring harness
- You’ll need to figure out the wiring for the cruise control to make it functional. Given that its only a few wires I don’t think this should be too difficult.
- For more information please see Hagasan’s thread
What’s included:
- 2005 AP2 S2000 steering wheel with modifications made for mounting (has some wear marks on the wheel, please see photos for closeups)
- Single stage airbag (excellent cosmetic condition)
- Custom machined hub that connects to the SoS hub
- Science of Speed rapid steering short hub
- Required mounting screws
Build thread here with photos of the install:
http://www.nsxprime.com/forum/showthread.php/176307-S2000-Steering-Wheel
Hagasan’s original thread with more information:
http://www.nsxprime.com/forum/showthread.php/137183-S2000-RSX-Steering-Wheel-Adaptors
Photo of parts included: https://www.dropbox.com/s/mtrv7g2w2z2iusx/DSC03397R.jpg?dl=0
Closeup photos:
https://www.dropbox.com/sh/vnwhlf6o931i64j/AAB0e433F4JP8GDbyQ8WuLdna?dl=0
Asking $1000 including shipping and PayPal fees.
Last edited:
