Running wires through firewall.

[NSX2NV]

I planning on installing my amps in the trunk and am wondering if someone knows the easiest way to run the wires.

I need to run a 12v wire from the battery terminal to the trunk. I also need to run a remote wire from the head unit to the trunk.

Anyone with experience please help.

TIA

 

[salontools]

There may be a spare circuit in the engine compartmant fuse box. Check the manual on this site. I ran the wiring for my CD changers's controller through the firewall behind the passenger's seat. There is a hole to the lower right of the fuel pump resistor.
I also ran the wire into the trunk on the driver's side. Pull the carpet off the firewall (gently) on the driver's side and you will see a small plastic plug. I drilled a small hole throgh it.
Also, if you do not have a CD changer, my '94 was pre wired for it. The wiring is near that small plastic plug. Use a test light and you will find out if it's "hot".
Bob