RFY power seat rail adaptors with OEM rails for bucket seats

[kevie_p]

Unfortunately these were too narrow to fit my KSP NSXR seats - already ordered OEM NSX power rails so these are for sale. Will come with OEM power rails and wiring harness. Good quality.

Side bracket mounting holes are 10.5 -12.5" wide

Max width seat is 15.5", will come with spacers to work with more narrow seats.

Asking $1600 - You don't have to cut up your stock seats, just remove them and bolt these up.

 

[Honcho]

Don't forget the note.

 

[MITA Motorsports]

You can modify these to fit your KSP seats.

 

[Veleno]

One side only? The front section where you cut the oem mounts look sharp!

 

[kevie_p]

One side only? The front section where you cut the oem mounts look sharp!

I just tested fitted one side. Sale will include both sides, driver and passenger.

**Updated photos with rails cleaned up and painted black. Looks really good, it's a shame they don't work with my seats.

Will mount to KSP/NSXR seats but is too wide to mount into the car. These look like the will work for standard Pole Positions or narrower seats. See max mounting width in photo to verify these will work with your seats.

 

[Veleno]

Will mount to KSP/NSXR seats but is too wide to mount into the car. These look like the will work for standard Pole Positions or narrower seats. See max mounting width in photo to verify these will work with your seats.

Did you drill new holes on the side brackets? Does it come with the seat controls?

 

[kevie_p]

Did you drill new holes on the side brackets? Does it come with the seat controls?

Yes, I drilled a hole to fit mount the seat.

They will come with seat controls and wiring.

 

[MITA Motorsports]

Unfortunately these were too narrow to fit my KSP NSXR seats - already ordered OEM NSX power rails so these are for sale. Will come with OEM power rails and wiring harness. Good quality.

Side bracket mounting holes are 10.5 -12.5" wide

Max width seat is 15.5", will come with spacers to work with more narrow seats.

Asking $1600 - You don't have to cut up your stock seats, just remove them and bolt these up.

Hello, have you received your power rails? You placed an order for the NSX-R power rails?

 

[kevie_p]

Hello, have you received your power rails? You placed an order for the NSX-R power rails?

Still waiting on them. Do you have any in stock?

 

[MITA Motorsports]

Still waiting on them. Do you have any in stock?

Yes, we do, though we want to know why your RFY rails do not fit? Is the seat too wide? It seems like you were able to mount them on though.

 

[kevie_p]

Yes, we do, though we want to know why your RFY rails do not fit? Is the seat too wide? It seems like you were able to mount them on though.

Yes, the side mounts on fine on to the seats but they are too wide to align the rails back to the stock mounting position on the car. About an inch too wide.

 

[jcdeng]

Yes, the side mounts on fine on to the seats but they are too wide to align the rails back to the stock mounting position on the car. About an inch too wide.

Just out of curiosity, how would this work for the the potential buyer? They would have to get a pair of narrow(er) bucket seats compare to what you have?

 

[kevie_p]

Just out of curiosity, how would this work for the the potential buyer? They would have to get a pair of narrow(er) bucket seats compare to what you have?

As long as the seat width isn’t more than 15 1/2 inches. You should be fine. Regular pole positions I think will work. They come with spacers if your seat is narrower than that as well.

 

[Veleno]

Do the NSXR brackets allow for a wider seat to be mounted?

 

[kevie_p]

Do the NSXR brackets allow for a wider seat to be mounted?

Yes, Nsxr oem rails have brackets that are wider. The brackets angle out more to allow for it vs these which are straight, see pic 2