REDO with Project Mu Racing Calipers, MUGEN S1 Seats, MUGEN Rails, MUGEN Harness Bar

[KR inspire]

I have been bored with the car and have been tired of the way the car looks, drives, the way it feels, and the way it brakes so I decided to upgrade on the existing aftermarket parts. I recently purchased some CE28's in TI silver 17x8 and 18x9.5 combo (still trying to sell my WORK S2R's, somebody please buy them! http://www.nsxprime.com/forums/showthread.php?t=76315&highlight=meister+s2r and upgraded to Comptech front and rear sway bars and a GT-ONE hood.

Time to get rid of my Brembo GT kit and replace my complete brake system with the following purchased from SP Engineering... I listed some retail pricing if members are curious as to what they are getting themselves into.
Project Mu Front 345mm 4 Piston, 4 Pad Racing Caliper Kit ($3850 msrp)
Project Mu Rear SCR-PRO rotors ($880 msrp)
Project Mu B-Force front pads (comes with the kit)
Project Mu B-Force rear pads ($102 msrp)
Project Mu Rear teflon brake lines ($100 msrp)
Project Mu reservoir tank covers ($30 msrp each x2)
Project Mu 335 brake fluid ($50 msrp x2)
Carbon brake ducts

I am also replacing my Bride ERGO's seats and Bride seat rails with the following parts I purchased from EVASIVE Motorsports in So. California.
MUGEN S1 bucket seats ($968 msrp each x2)
MUGEN Seat rails ($462 msrp each x2)
MUGEN Harness Bar ($850 msrp)
TAKATA 340 harnesses ($375 each x2)
and Taking the MUGEN FG360 out and will be using my MUGEN Racing II or Personal Steering wheel in suede

Thanks to http://www.evasivemotorsports.com for all the MUGEN parts and http://www.sp-power.com for the Project Mu brake parts, and William Law for all the help.

I will post updated pics when I have sometime to get the parts onto the vehicle.

 

[JDMnsxR]

Re: REDO with Project Mu Racing Calipers, MUGEN S1 Seats, MUGEN Rails, MUGEN Harness Bar

looks great hugh.... awesome

 

[GT-N]

Re: REDO with Project Mu Racing Calipers, MUGEN S1 Seats, MUGEN Rails, MUGEN Harness Bar

can i get some closer pics of the mugen harness bar when its outside of its wrapper?
oh, and i love those ZAZ side skirts
thanks

 

[da3dalus]

Holy god.

I bet the people love you at that shop where you ordered all of the parts!

Did you have to pay MSRP on them or did you get the "hook up"?

What was wrong with the brembos? Most people would be all over the Brembo GT kit as the "end all brake kit". What didnt you like, what will the Project Mu's improve on? 4-Piston enough? Do they make a 6 Piston kit caliper?

 

[NSX_BOB]

Re: REDO with Project Mu Racing Calipers, MUGEN S1 Seats, MUGEN Rails, MUGEN Harness Bar

I have been bored with the car and have been tired of the way the car looks, drives, the way it feels, and the way it brakes so I decided to upgrade on the existing aftermarket parts. I recently purchased some CE28's in TI silver 17x8 and 18x9.5 combo (still trying to sell my WORK S2R's, somebody please buy them! http://www.nsxprime.com/forums/showthread.php?t=76315&highlight=meister+s2r and upgraded to Comptech front and rear sway bars and a GT-ONE hood.

.

OOOOOO is that the Amuse widebody s2000 i see in the back? im definately a fan of that car even tho many people arent.:frown:

 

[nuccaJB]

I think I need a box of tissues....

 

[HYPERTUNE]

Re: REDO with Project Mu Racing Calipers, MUGEN S1 Seats, MUGEN Rails, MUGEN Harness Bar

I have been bored with the car and have been tired of the way the car looks, drives, the way it feels, and the way it brakes so I decided to upgrade on the existing aftermarket parts. I recently purchased some CE28's in TI silver 17x8 and 18x9.5 combo (still trying to sell my WORK S2R's, somebody please buy them! http://www.nsxprime.com/forums/showthread.php?t=76315&highlight=meister+s2r and upgraded to Comptech front and rear sway bars and a GT-ONE hood.

Time to get rid of my Brembo GT kit and replace my complete brake system with the following purchased from SP Engineering... I listed some retail pricing if members are curious as to what they are getting themselves into.
Project Mu Front 345mm 4 Piston, 4 Pad Racing Caliper Kit ($3850 msrp)
Project Mu Rear SCR-PRO rotors ($880 msrp)
Project Mu B-Force front pads (comes with the kit)
Project Mu B-Force rear pads ($102 msrp)
Project Mu Rear teflon brake lines ($100 msrp)
Project Mu reservoir tank covers ($30 msrp each x2)
Project Mu 335 brake fluid ($50 msrp x2)
Carbon brake ducts

I am also replacing my Bride ERGO's seats and Bride seat rails with the following parts I purchased from EVASIVE Motorsports in So. California.
MUGEN S1 bucket seats ($968 msrp each x2)
MUGEN Seat rails ($462 msrp each x2)
MUGEN Harness Bar ($850 msrp)
TAKATA 340 harnesses ($375 each x2)
and Taking the MUGEN FG360 out and will be using my MUGEN Racing II or Personal Steering wheel in suede

Thanks to http://www.evasivemotorsports.com for all the MUGEN parts and http://www.sp-power.com for the Project Mu brake parts, and William Law for all the help.

I will post updated pics when I have sometime to get the parts onto the vehicle.

So, that's your EK too?

I've also got a turbo EK. 11.4@134 on street tyres. Only 1.6 though :biggrin:

NICE CARS!!!