Recaro brackets?

[David]

I need to put a couple of Recaro Pole Positions in my car and can't find brackets that will fit. The Dali ones do not appear to be available. Any ideas?



------------------
Don't no nuttin 'bout no NSX;
Don't no nuttin 'bout birthin' no babbies.

 

[burbel]

Does Chris at ScienceofSpeed have his brackets in yet? I heard that they were on the way, last time I checked, and only weighed 5.5 lbs. Not sure if they work with the Recaros, but he'd probably be a good resource to check!

 

[19inchNSX]

Yes the Taitec seat rails that Science of Speed offers does fit the Recaro Pole Position seats as long as the seat side mount base is in between 270-310 mm

Originally posted by burbel:
Does Chris at ScienceofSpeed have his brackets in yet? I heard that they were on the way, last time I checked, and only weighed 5.5 lbs. Not sure if they work with the Recaros, but he'd probably be a good resource to check!

 

[ScienceofSpeed]

The Pole Position seat base does not fit between the sliders, as it is about 1mm too wide.

However, it can be mounted above the sliders (you'll loose about .5" by doing this). To do this, you need a Sparco or Recaro side mount slider. I can get the Sparco sliders in AL or steel.

The Pole Position is a very wide seat. For most people, I would recommend the SPG or another Sparco seat.

Cheers,
-- Chris

------------------

www.ScienceofSpeed.com - Click for more info
www.NSXClassifieds.com - The internet's only exclusive NSX Classified site!

 

[19inchNSX]

oops....I think I mistaken it with the recaro SPGs. sorry

Originally posted by ScienceofSpeed:
The Pole Position seat base does not fit between the sliders, as it is about 1mm too wide.

However, it can be mounted above the sliders (you'll loose about .5" by doing this). To do this, you need a Sparco or Recaro side mount slider. I can get the Sparco sliders in AL or steel.

The Pole Position is a very wide seat. For most people, I would recommend the SPG or another Sparco seat.

Cheers,
-- Chris

 

[David]

Weren't Pole Positions used in one of the JDM versions of the NSX? The Type-R or Zero? Anyone know of a source for the brackets they used? Enrique?

------------------
Don't no nuttin 'bout no NSX;
Don't no nuttin 'bout birthin' no babbies.

 

[maomaonsx]

Yeap, both the NSX-R and NSX S, and S-zero uses pole positions. The R seats are covered in alcantara and only available in red and optional black. The type-S and S-zero pole positions are available in leather colored black and exterior color in the center. All OEM pole positioins seats have electronic sliders. Honda Japan only sells them together, seat and sliders, and cost about $6000 each!

------------------
George Wang
Keep it Real!
http://www.geocities.com/maomaonsx/price.html