***AVOID MARKETPLACE SCAMS!!***

Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. They also also creating usernames similar to veteran Prime names to trick you (e.g. DrManny3 vs DrManny1). Before you enter into a deal with ANY seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.

Caveat Emptor!

Reply to thread

Message

Just a heads up for a few of you that might be having the idle hunting issues with this mod, while we were installing my new LINK ECU we grabbed the loom while the car was idling and it started hunting up and down which the car had done on the very odd occasion before. So we turned her off and checked all the pin outs leading into the OEM ECU and some were lose so after tighteneing up and checking all 4? plugs it had gone away. Some of the OEM connectors are a bit smaller than the others and they were just slightly lose so it would be an intermittant issue, there was about 3 that were lose.

[QUOTE="scammy, post: 1841302, member: 24046"] Just a heads up for a few of you that might be having the idle hunting issues with this mod, while we were installing my new LINK ECU we grabbed the loom while the car was idling and it started hunting up and down which the car had done on the very odd occasion before. So we turned her off and checked all the pin outs leading into the OEM ECU and some were lose so after tighteneing up and checking all 4? plugs it had gone away. Some of the OEM connectors are a bit smaller than the others and they were just slightly lose so it would be an intermittant issue, there was about 3 that were lose. [/QUOTE]

Verification