1x in stock
-
***AVOID MARKETPLACE SCAMS!!***
Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. Before you enter into a deal with any seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.
Caveat Emptor!
Procar Specials NSX
- Thread starter Procar Specials
- Start date
Info:
The cf nav pods are no longer in production, our last one with production no 10/10 was sold last week.
We will have 2 new cf center consoles and side door cf inserts beginning of next week. 1 unit of both is still available
These will be the last units, the production will end also.
The cf nav pods are no longer in production, our last one with production no 10/10 was sold last week.
We will have 2 new cf center consoles and side door cf inserts beginning of next week. 1 unit of both is still available
These will be the last units, the production will end also.
Last edited:
i'm considering upgrading to an 02 rear just for that diffuser. for all practical purposes how badly does that scrape?
Maybe you know the Procar NSX, its lowered with the TEIN RE's and race springs to the maximum point.
Even after some test drives at the Nordschleife, there is no single scratch on it and that track is very bumpy.
I'm sure that there is no issue, and with some care and the 'right' angles
at some speed bumps, all is fine.
Some of the diffusors will be installed at US customer NSX's soon, so maybe we can get an report from there :smile:
Let me know if you wanna have an diffusor, actually we have 3 units in production. They should be ready for shipment until end of the month.
Will you destroy the molds or could you still make some to order in the future as one-offs at a higher price?
The molds will be stocked, not destroyed, but we dont produce
more consoles and stock them as we did last few years.
You can place an order every time, but the production time is ~ 8 weeks.
The price should be the same, its stabil since the introduction of the Euro
currency.
Nice, one week is very fast for DHL.
Let me know when you will get the RGT diffusor.
Glad to read you like it. :smile:
new in stock again
1x NSX-R GAUGE CLUSTER KIT
1x NSX-R cf diffusor
2x NSX alternator belt cf cover and cruise control cf cover
1x NSX cf radiator brackets
1x NSX cf B pillar covers
1x NSX cf side vents
1x NSX cf rear strut bar
1x Procar BBK
3x Procar front tower brace (LHD)
1x NSX-R GAUGE CLUSTER KIT
1x NSX-R cf diffusor
2x NSX alternator belt cf cover and cruise control cf cover
1x NSX cf radiator brackets
1x NSX cf B pillar covers
1x NSX cf side vents
1x NSX cf rear strut bar
1x Procar BBK
3x Procar front tower brace (LHD)
new NSX-R NA2 suspension in stock.
Please ask for price incl shipment
Please ask for price incl shipment
- Joined
- 28 May 2008
- Messages
- 2,500
Prices on everything??
prices sended via pm
sold
SOLD
INFO (got some inquiries for the Procar BBK)
The kit contents:
front
2x 330mm AP rotors
2x rotor hubs (black anodized)
2x screw sets for rotors
2x adapters (gold galvanized)
8x adapter screws (gold galvanized)
front and rear:
Endless endurance performance pads (especially made for 330mm rotors)
4x SS brake lines (black)
As option we offer NSX-R rear calipers and 303mm rear rotors. (JDM NSX-R)
We have a set of rear R rotors (slotted) in stock for a real special
price.
Another nice JDM NSX-R part for sale:
NA2R-taillight kit (3pcs,complete kit incl. gaskets, covers)
new in stock and ready for sale now
1x Procar cf triangle brace
1x Procar cf triangle brace
Last edited:
The USB micro stick is integrated ino the OEM stereo system and works
perfect at the removed cassette deck section :smile:
perfect at the removed cassette deck section :smile:
So I have been trying to justify the cost and made some assumptions based on previous posts about this console. I'm now kicking around the idea if I should get it or not. No more overlayed stuff for me anymore.
Now I see this detailed picture posted and am concerned. Can you please tell me if your console is truly 100% carbon fiber or an OEM unit simply overlayed with cf? The reason I ask is because I always thought if it was entirely made out of 100% cf that it would show in the circled areas as well. Thanks.
Now I see this detailed picture posted and am concerned. Can you please tell me if your console is truly 100% carbon fiber or an OEM unit simply overlayed with cf? The reason I ask is because I always thought if it was entirely made out of 100% cf that it would show in the circled areas as well. Thanks.
Remove your center console and you will see that the 2 points you marked at the top are plastic parts from the OEM radio.
The main case for the ashtray is OEM plastic, (Its fixed with 4 screws at the backside of the console) only the ashtray cover is cf.
Maybe that picture helps.
The main case for the ashtray is OEM plastic, (Its fixed with 4 screws at the backside of the console) only the ashtray cover is cf.
Maybe that picture helps.
Because the OEM console is plastic and very light, there is only a few gram
of weight saving. Its what I would call a cosmetic part, like all interior part.
I you wanna have dramatic weight savings, you must buy parts like our bumper beams (-20kg)
Thank you for the extra pictures and suggestions. I have taken the console apart and below is what I have found on my OEM unit.
Rather than make assumptions please answer clearly. Is your unit 100% full carbon console or a carbon overlay? Yes or no?
- Areas marked green are part of the OEM radio/ ashtray.
- Areas marked red are a continuous part of the OEM console.
Rather than make assumptions please answer clearly. Is your unit 100% full carbon console or a carbon overlay? Yes or no?
YES.
Maybe we have to post other pictures as soon the next console is produced.
Same question we got for the door insert pieces
Here is one picture who shows all details
Last edited:
one of our customers bought a complete Procar BBK.
This is what the customer had installed before:
Movit 342x34mm BBK kit front with pads, adapters, 25mm spacers and brake lines
Kit is plug and play.
He wanna sale that kit in customer order now, please pm or email for
price incl shipment
This kit was installed for ~ 500 miles, so its like new.
that kit rocks, even if the basic weight of the driver is a bit out of the standard......
(seen at the Nürburgring Nordschleife)
This is what the customer had installed before:
Movit 342x34mm BBK kit front with pads, adapters, 25mm spacers and brake lines
Kit is plug and play.
He wanna sale that kit in customer order now, please pm or email for
price incl shipment
This kit was installed for ~ 500 miles, so its like new.
that kit rocks, even if the basic weight of the driver is a bit out of the standard......
(seen at the Nürburgring Nordschleife)
Last edited:
