Am having trouble with fan speed on climate control. Fan only runs when I crank speed control to manual max position. Fan does not run in auto mode or max cold position unless I turn speed control to max.
Problem with Climate C
- Thread starter whwnsx
- Start date
Welcome to 'Prime
http://www.nsxprime.com/FAQ/Troubleshooting/climatecontrol.htm
It could be the issue per TSB on the power transistors, but more likely I suspect a problem with the control board failing for leaky capacitors.
Do a SEARCH on Climate control repair & you'll find lots of information posted already, including where to have it repaired, or even DIY if you are capable of handling a soldering iron & not overwhelmed at the prospect of replacing components on a PC Board.
There's a lot of info available on the site already in archives if you take the time to look for it.
http://www.nsxprime.com/FAQ/Troubleshooting/climatecontrol.htm
It could be the issue per TSB on the power transistors, but more likely I suspect a problem with the control board failing for leaky capacitors.
Do a SEARCH on Climate control repair & you'll find lots of information posted already, including where to have it repaired, or even DIY if you are capable of handling a soldering iron & not overwhelmed at the prospect of replacing components on a PC Board.
There's a lot of info available on the site already in archives if you take the time to look for it.
Thanks for the info. Yes I already found lots of stuff on the CC unit as you suggested. I'll take a look at the CC board.
tHANKS EVERYONE FOR YOUR HELP.
