Power steering and manual swap

[whiteNSXs]

Is there anyone on the list who owns 1995 or 1996 NSX really wants to have manual steering and at the same time wants to lose a few pounds on the car? If there is such a person, I am proposing a direct swap of the necessary components from my 1994 Coupe with 15k miles. Any taker?
Steve

 

[NsXTaCY168]

Steve,

Swap it with your 97' NSX.

So you are again the proud owner of 2 NSX's? You sold your 92' white to buy a 94'?

Let me know if you find any takers for the swap, I would love to swap my manual for the power steering.

Kevin

 

[KANE]

I have converted a 1992 auto nsx to 6 speed manual trans, I converted to manual steering at the same time. You can't just swap the power steering components, as the wiring harness is not isolated for the electric steering rack. You would have to swap the entire wiring harness at the same time. This would create alot of complications when you tried to use a na1 harness on a na2 car and a na2 harness on a na1 car. here is a list of parts that need to be swapped.

Ecu
Traction control computer
Entire wiring harness
Steering column
Steering rack
U joint between rack and column
Subwoofer brackets
Guage cluster
shift linkage

 

[whiteNSXs]

Too bad. And 1997+ coupes are just so rare and probably cost an arm and a leg when they are for sale. Thanks for the info, Ravi.
Steve

 

[KANE]

no problem