Dear fellow NSX owners,
I finally got motivated last weekend and took apart my two door panels on my '91 to view the type of window regulators the car has. I purchased the car in June '04 and have been very careful not to lower either window since reading about the early regulators breaking. Both windows worked fine when I checked it out last summer. I cleaned and re-greased the window tracks as well as the regulator knob. The good news, both doors have the updated box type regulators. The bad news, the passenger side window now will not work. I tested the passenger side motor by connecting the motor wires to the battery, it works fine both up and down. The window fuses under the hood are not blown, I removed and re-connected the window relay, still nothing. Any suggestions as where to go from here? Thanks.
John
'91 Red/Ivory
I finally got motivated last weekend and took apart my two door panels on my '91 to view the type of window regulators the car has. I purchased the car in June '04 and have been very careful not to lower either window since reading about the early regulators breaking. Both windows worked fine when I checked it out last summer. I cleaned and re-greased the window tracks as well as the regulator knob. The good news, both doors have the updated box type regulators. The bad news, the passenger side window now will not work. I tested the passenger side motor by connecting the motor wires to the battery, it works fine both up and down. The window fuses under the hood are not blown, I removed and re-connected the window relay, still nothing. Any suggestions as where to go from here? Thanks.
John
'91 Red/Ivory