M MinnesotaR6 Joined 4 January 2008 Messages 177 5 June 2014 #1 What route did you go with for your parking brakes? I have the Wilwood caliper setup with no E-brake at the moment. any pictures?
What route did you go with for your parking brakes? I have the Wilwood caliper setup with no E-brake at the moment. any pictures?
sca037 Joined 10 April 2008 Messages 2,457 Location Northville, Michigan 5 June 2014 #2 Our LoveFab car has the Stoptech calipers (and rotors) up front, but stock calipers in the rear....so the parking brake is intact. Brian
Our LoveFab car has the Stoptech calipers (and rotors) up front, but stock calipers in the rear....so the parking brake is intact. Brian
chudson1549 Joined 1 August 2000 Messages 1,788 Location charleston,sc 5 June 2014 #3 Stoptech w/ stoptech e-brake
J jtrikakis Joined 7 March 2013 Messages 307 Location Chantilly, VA 5 June 2014 #4 WPPro with eBrake. Cables are a bit ticky and your rims may cause some creative positioning of your cables.
WPPro with eBrake. Cables are a bit ticky and your rims may cause some creative positioning of your cables.
chudson1549 Joined 1 August 2000 Messages 1,788 Location charleston,sc 6 June 2014 #5 I made a bracket to hold my cable
J jtrikakis Joined 7 March 2013 Messages 307 Location Chantilly, VA 6 June 2014 #6 what rims do you use?
TURBO2GO Joined 8 March 2006 Messages 16,594 Location Boston 6 June 2014 #8 I think brandon has redone that bracket.
J jtrikakis Joined 7 March 2013 Messages 307 Location Chantilly, VA 6 June 2014 #9 Thanks. I'll check with him.
M MinnesotaR6 Joined 4 January 2008 Messages 177 9 June 2014 #10 so you guys with the stoptech had to make brackets for the cable? are u using the oem cable?
Phoenix599 Joined 17 August 2011 Messages 128 Location Alexandria, VA 9 June 2014 #11 Stoptech w/E-brake. Advan RS wheels 17/18. Bolt on.
chudson1549 Joined 1 August 2000 Messages 1,788 Location charleston,sc 10 June 2014 #12 The bracket I made was to hold the emergency cable from rubbing the rim. Everything else was a straight bolt on. I didn't want to zip tie it down
The bracket I made was to hold the emergency cable from rubbing the rim. Everything else was a straight bolt on. I didn't want to zip tie it down