Original NSX Decals

[aztec]

If you need any of the decals for your rear tailight, let me know. ([email protected])I was the one who originally made them for KellyJoe late last year. I have some more made up and ready to ship. I can make them for the inside of the light or outside. Whichever you prefer.
They are 6.00 apiece including shipping(U.S.). You can send a money order, cashiers check via mail or pay using Paypal. Please use direct bank account funds or echeck via Paypal only.No credit cards.

Paypal Account:[email protected]


Update!
If you have never applied vinyl decals before, I recommend getting two just in case you make an error. Several people have done so and are requesting a second decal.

******APPLICATION OF YOUR DECAL******
As far applying the decal. You have to apply it to the inside of the lens.((If reverse decal) Make sure you wet the surface lightly prior to applying your decal. If you don't the first thing it sticks to could end up being where it has to go. Peel off the backing slowly from the decal, wet your surface with a spraybottle or similar and apply. Do not take off the aplication paper until you have squeegeed it thoroughly. Let it sit for a few minutes and slowly peel off the paper. dab off all your excess water and reinstall your taillight. Hope this helps...Chris

 

[KellyJoe]

Here's a not so great pic of mine after the change that gives an idea of how it looks. An inside the lens decal BTW.

 

[BadCarma]

NSX Decals

aztec
I will take two for the inside of the lens like kellyjoe has, I already have your paypal info thanks! will send payment in the am.thank you for responding promptly to my inquiry.
Best Regards David

 

[loomup]

I will take two inside decals. Payment thru Paypal Check email for address.

 

[KellyJoe]

Could someone put a ruler to their word "ACURA" on the rear and forward the measurements on to Chris for verification? Mine's in the shop having the stereo redone. I think it's 5 in. wide by 3/4 in. tall but not absolutely sure. TIA.

 

[MvM]

Aztec,
I would like to have one but I live in the Netherlands so shipping will be more. If you can give me a quote on shipping to Rotterdam, Netherlands I will take one, yes, very nice, thank you very much.

 

[Slackjaw]

I'll take one via paypal. email me at work at

[email protected]

send me paypal info.

-Dan

 

[NSXaholic]

Could someone put a ruler to their word "ACURA" on the rear and forward the measurements on to Chris for verification? Mine's in the shop having the stereo redone. I think it's 5 in. wide by 3/4 in. tall but not absolutely sure. TIA.

Can somebody do this sooner rather than later if possible. I am trying to order a set that will be overnighted today, and I want to confirm that the demensions are sized right before Chris cuts them.

Regards.

 

[KellyJoe]

Size

Can somebody do this sooner rather than later if possible. I am trying to order a set that will be overnighted today, and I want to confirm that the demensions are sized right before Chris cuts them.

Regards.

I found the dimensions wrote on the floppy I gave to Chris to cut mine off of an AI file. They are 5 in. wide by .75 in. tall.

 

[NSXaholic]

Re: Size

I found the dimensions wrote on the floppy I gave to Chris to cut mine off of an AI file. They are 5 in. wide by .75 in. tall.

Thanks KellyJoe!!

Regards.

 

[MvM]

Aztec,

Have you had time yet to look for the shipping costs to the Netherlands yet ??

 

[loomup]

I recently order a pair of inside decals, have not received them. When are you going to ship them paid through paypal.

 

[loomup]

Thanks looking forward to receiving them.

 

[madfast]

payment sent

aztec,
I already sent you payment for one sticker. Pls send me the one that I can stick from inside the panel. That means that I want the sticker that's in reverse lettering. Thanks!
p.s. how do I take the Acura stock lettering out? sand it out? or is it a sticker too? thanks!
oh, the paypal account I used to send you money was the one from nyu.edu ok? thanks!

 

[KellyJoe]

Re: payment sent

aztec,
I already sent you payment for one sticker. Pls send me the one that I can stick from inside the panel. That means that I want the sticker that's in reverse lettering. Thanks!
p.s. how do I take the Acura stock lettering out? sand it out? or is it a sticker too? thanks!
oh, the paypal account I used to send you money was the one from nyu.edu ok? thanks!

Try here. Link explains everything. It was really easy to do. Just requires patience when disassembling the lens.

 

[madfast]

Thanks so much Kelly Joe!