Oil Scavenge Pumps, what's the recommend flow?

[EAC]

I have a Weldon 9200-A pump, which is rated at 32 GPH. Will that flow enough or should I go with a 3 GPM pump like the turbowerx?

http://turbowerx.com/Scavenge_Pumps/Exa-Pump/Exa-Pump.html

 

[angus]

3 GPM is way more than enough.

 

[EAC]

3 GPM is way more than enough.

So, what's recommended?

 

[E-Nough Logic]

I have a Weldon 9200-A pump, which is rated at 32 GPH. Will that flow enough or should I go with a 3 GPM pump like the turbowerx?

http://turbowerx.com/Scavenge_Pumps/Exa-Pump/Exa-Pump.html

That's exactly what i bought after a lot of research. The Exa pump is definitely the one to go with.

 

[EAC]

That's exactly what i bought after a lot of research. The Exa pump is definitely the one to go with.

Yeah, I've heard it's the best pump. I just don't want oil pushing out of my turbo's.

 

[Mase]

We use weldon pumps on many turbo setups we've done. From street cars that have over 40k miles on the pump, to one we've been tracking for 4 years now. Never one failure. Most turbos dont actually need much oil, especially the ball bearing center sections. Its a small stream that will actually discharge out of the turbo. -10 lines are usually even overkill for return setups

Whats important on a Scavenging pump is that its a positive displacement pump. We've found on some kits they dont provide a pump that is actually positive displacement and have seen oil backing up and blowing the seals on the turbo.

Good luck with it.

Regards,
Mase

 

[jdm monkey]

Wow thats a lot of money for a pump. Here's my pump. I'm all sold out though. New shipment is coming in a week.
http://cgi.ebay.com/ebaymotors/_W0Q...emZ110732935315QQsspagenameZSTRKQ3aMESOXQ3aIT