Offset for Enkei RPM2

[PKim]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220255204971

Seller said the offset are 45mm for the 17 X 8's and 35mm for the 18 X 9's. Will this work for my '97 nsx?

 

[(NSX REY)]

I have the same wheels for my 1991; the only difference is that mine are 17x7 and 18x8 the offsets being the same. You will need a 5mm spacer in the front to clear the calipers. I know I need them.

See Enkei Chart here: http://www.enkei.com/RacingSeriesSpecs/RPM2.html

 

[Moses]

from what I've read from searching this forum is that 245 size tires on the front are to wide and you will be scraping on certain parts of the car.

 

[PKim]

the seller actually has 255 on the front and I would just change them out to 215.
NSX REY,
will the front with 5mm spacer be flush with the fender? what about the rear do they also need spacer or not?

thanks

 

[Hapa88]

will the front with 5mm spacer be flush with the fender? what about the rear do they also need spacer or not?

thanks

Paul,
With a 5mm spacer on the front, it'll be a +40 overall offset on a 8" wheel and it'll be pretty flush.

However with a 9" rear wheel and a +35 offset you'll need about a 10-13mm spacer to make it equally flush as your fronts.

Also, be sure to get the correct size hubrings to fit the NSX and those wheels. You should not install the wheels without them (as far as I can tell the S2000 front and rear rings are the same sizes as the NSX).

 

[makena88]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220255204971

Seller said the offset are 45mm for the 17 X 8's and 35mm for the 18 X 9's. Will this work for my '97 nsx?

http://www.nsxprime.com/forums/search.php?searchid=2147718 Look at the ones that were previously sold here on prime. I had these wheels too and I needed front spacers.

 

[shrddr]

do any of y'all know if a 17x7 rpm2 with +38 offset would clear the NA2 calipers without a spacer?

thanks,
v