nsx roll bar

[mrbozo]

just thought i would throw this out and see if anyone has any experience with this? I race my nsx at the drag strip and now it runs 11.1 at 130 mph. The car now requires a 5 point roll cage/bar to be teched for 11.5-10.00. I dont know if any are being made for the nsx or not or if anyone knows of any used ones. If you know of any one that makes them please respond with info.(any input would be appreciated) Thanks, oh yea nhra specs I think are min 1.75 inches dia and be .118 wall thickness.

 

[docjohn]

try these http://www.nsxprime.com/forums/showthread.php?t=133906&highlight=roll+cage and http://www.nsxprime.com/forums/showthread.php?t=112597&highlight=roll+cage

 

[mrbozo]

thanks for the input but those are full cages and I still drive on the street. Those are also only 1.5 diameter and for drag racing and just looking for a 5 point roll bar/cage they must be 1.75 inches in diameter

 

[docjohn]

is'nt a 5 point cage pretty much a full bolt in cage A roll bar is very different from a 5 point so would iether be acceptable?

 

[mrbozo]

if you put a full roll cage in it is at least a 6 point or 8 point or more. nhra defines a roll bar as a 5 point http://www.nhraonline.com/contacts/tech_faq.html

 

[TXvsLV]

the carbing cage is an awesome piece!!!!
worth it for a street driven/track car

eye catcher
ask anyone from Houston how great it looks at night/day with sun or lights on it from the rear through the back window

 

[TURBO2GO]

eye catcher

From my understanding that is pretty much ALL it is.

There's a reason they are requiring proper safety gear running 11.1. I would not skimp. Go to a proper shop that builds cages and bars. I recently went to one and it was eye openning.