Emerging from the Dali Batcave for a few moments with a couple of new bits...Yikes, it's fall already and October is almost over. 
<B><a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2399">
Dali/KS Remote Reservoir Street-Track Coilover</a>: $2250.00</B>
Dali/KS Remote Reservoir ST Coilover. Our version of the AFFORDABLE ultimate suspension for the NSX, Type-R like forward rate bias for stable and predictable high speed handling without the harsh road manners for your coffee club commutes! (plays very well with the swaybars below) Tested & tuned on the Radical Loop at SM, eat's normal coilovers for lunch.
Want MOTONS but can't afford them? (I can't either) This is your play.
Quick Specs:
Remote reservoir for increased performance
10K front and 8.7K rear spring rate
Separate Compression & Rebound adjustment
Separate height adjustment and spring preload
Lighter weight than the OEM units
Pillowball upper mounts included
1 year limited warranty
For those of you that live at the track, we also have our N1 Spec version<B><a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2400">
Dali/KS Remote Reservoir RACE Coilover</a>: $2250.00</B>
<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/dali-remote-reservoir-track-coilover.image.jpg" alt="Dali/KS Remote Reservoir Track Coilover" /></h1>
***
<B><a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2394">Battery Mount: Optima 35 & D35</a>: $65.00</B>
OK OK OK so I finally made a billet mount for the Optima RED & YELLOW top that OPTIMA says is the one for the NSX. This lite weight billet mounting bracket is for the 35 (red) and D35 (yellow). Now Brian can stop bugging me and buy one. According to the Optima website this is the battery that they recommend for the NSX, however several of their other models will work fine as well. This mounting bracket fits the following models:
35
D35
Stainless mounting hardware included.
<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/optima-d35-battery-mount.image.jpg" alt="Battery Mount: Optima 35 & D35" /></h1>
***
<B><a <a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2407">Type-Q Swaybar set: 1991-1994</a>: $250.00<--SPECIAL DEAL PRICE*</B>
Set of 1 front and 1 rear hollow DOM steel 25.4mm swaybars now front bias dialed for you Type-r Freaks! Our front bar is the usual 1.0" X 0.187" wall bar with a J factor of 0.083, but the rear is a 1.0" X 0.156" wall bar with a J factor of 0.077, taking the 'edge' off and giving a more forgiving balance on street tires while still severely limiting body roll.
Welded on lateral locating collars included, both front & rear bars 3 hole adjustable.
Included set of poly bushings, slimy grease & brackets, bars powdercoated red.
IN STOCK
*Our supplier made a typo on the bar bend profile code which is why these will only fit 1991-1994 and why I beat on him about the price! :biggrin:
This price only applies to these 25 sets.
<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/swaybars-1991-track-street-race.im.jpg" alt="Type-Q Swaybar set: 1991-1994" /></h1>
***
<B><a <a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2403">Tools: OEM Service Connector</a>: $12.00</B>
Still using a paper clip? YIKES!! Be a real man! get your very own Honda Factory Service Tech Connector Diagnostic Shorting Tool.
WARNING: Will cause a severe case of indicator light blinking, be prepared with a pad and pen to write down the codes...
<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/service-connector.image.jpg" alt="Tools: OEM Service Connector" /></h1>
Anything else that happens this month will be <a href="http://www.daliracing.com/v666-5/info/whats_new.cfm">posted here</a>.
Want to <a href="http://www.daliracing.com/v666-5/info/email_signup.cfm">sign up </a>for our monthly email alerts? It takes all the work out of keeping up with the new bits...
OK - back into the batcave for another month.
<B><a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2399">
Dali/KS Remote Reservoir Street-Track Coilover</a>: $2250.00</B>
Dali/KS Remote Reservoir ST Coilover. Our version of the AFFORDABLE ultimate suspension for the NSX, Type-R like forward rate bias for stable and predictable high speed handling without the harsh road manners for your coffee club commutes! (plays very well with the swaybars below) Tested & tuned on the Radical Loop at SM, eat's normal coilovers for lunch.
Want MOTONS but can't afford them? (I can't either) This is your play.
Quick Specs:
Remote reservoir for increased performance
10K front and 8.7K rear spring rate
Separate Compression & Rebound adjustment
Separate height adjustment and spring preload
Lighter weight than the OEM units
Pillowball upper mounts included
1 year limited warranty
For those of you that live at the track, we also have our N1 Spec version<B><a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2400">
Dali/KS Remote Reservoir RACE Coilover</a>: $2250.00</B>
<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/dali-remote-reservoir-track-coilover.image.jpg" alt="Dali/KS Remote Reservoir Track Coilover" /></h1>
***
<B><a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2394">Battery Mount: Optima 35 & D35</a>: $65.00</B>
OK OK OK so I finally made a billet mount for the Optima RED & YELLOW top that OPTIMA says is the one for the NSX. This lite weight billet mounting bracket is for the 35 (red) and D35 (yellow). Now Brian can stop bugging me and buy one. According to the Optima website this is the battery that they recommend for the NSX, however several of their other models will work fine as well. This mounting bracket fits the following models:
35
D35
Stainless mounting hardware included.
<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/optima-d35-battery-mount.image.jpg" alt="Battery Mount: Optima 35 & D35" /></h1>
***
<B><a <a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2407">Type-Q Swaybar set: 1991-1994</a>: $250.00<--SPECIAL DEAL PRICE*</B>
Set of 1 front and 1 rear hollow DOM steel 25.4mm swaybars now front bias dialed for you Type-r Freaks! Our front bar is the usual 1.0" X 0.187" wall bar with a J factor of 0.083, but the rear is a 1.0" X 0.156" wall bar with a J factor of 0.077, taking the 'edge' off and giving a more forgiving balance on street tires while still severely limiting body roll.
Welded on lateral locating collars included, both front & rear bars 3 hole adjustable.
Included set of poly bushings, slimy grease & brackets, bars powdercoated red.
IN STOCK
*Our supplier made a typo on the bar bend profile code which is why these will only fit 1991-1994 and why I beat on him about the price! :biggrin:
This price only applies to these 25 sets.
<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/swaybars-1991-track-street-race.im.jpg" alt="Type-Q Swaybar set: 1991-1994" /></h1>
***
<B><a <a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2403">Tools: OEM Service Connector</a>: $12.00</B>
Still using a paper clip? YIKES!! Be a real man! get your very own Honda Factory Service Tech Connector Diagnostic Shorting Tool.
WARNING: Will cause a severe case of indicator light blinking, be prepared with a pad and pen to write down the codes...
<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/service-connector.image.jpg" alt="Tools: OEM Service Connector" /></h1>
Anything else that happens this month will be <a href="http://www.daliracing.com/v666-5/info/whats_new.cfm">posted here</a>.
Want to <a href="http://www.daliracing.com/v666-5/info/email_signup.cfm">sign up </a>for our monthly email alerts? It takes all the work out of keeping up with the new bits...
OK - back into the batcave for another month.
