Reply to thread

Message

Jason - I got a used and not working extra clock module from Shawn in Tampa. I think he gave it to me and all I had to do was pay for postage. I know there are others out there and perhaps someone might view this thread and donate one to you for this project.

I only used the front frame and sides so that the unit would not blow out of the dash when I hit the go pedal! From there I used some left over plastic, glue and a little bondo to shape. Took a bit of time to get it where I want it but I'm still happy with how it works. I have the "naked" gauge and remote the control board back inside the opening. I also mounted the Zietronix alarm in the air vent and it is loud and a red light flashes. This alarm is totally programmable and I have it set to go of at 7500 rpm's and also if the turbos overboost. A very nice option. Here are the links to these two items;

http://www.zeitronix.com/Products/LCD/LCD.shtml
http://www.zeitronix.com/Products/zavt/zavt.shtml

If you want to go another option, you might be able to take some really good measurements and construct this with a 3D printer. I'm not familiar with what you can and cannot make with these.

On a side note, is there anyway to make my display brighter? Thanks.

<blockquote data-quote="Valhalla" data-source="post: 1803367" data-attributes="member: 25419">Jason - I got a used and not working extra clock module from Shawn in Tampa. I think he gave it to me and all I had to do was pay for postage. I know there are others out there and perhaps someone might view this thread and donate one to you for this project. I only used the front frame and sides so that the unit would not blow out of the dash when I hit the go pedal! From there I used some left over plastic, glue and a little bondo to shape. Took a bit of time to get it where I want it but I&#039;m still happy with how it works. I have the &quot;naked&quot; gauge and remote the control board back inside the opening. I also mounted the Zietronix alarm in the air vent and it is loud and a red light flashes. This alarm is totally programmable and I have it set to go of at 7500 rpm&#039;s and also if the turbos overboost. A very nice option. Here are the links to these two items;<a href="http://www.zeitronix.com/Products/LCD/LCD.shtml" target="_blank">http://www.zeitronix.com/Products/LCD/LCD.shtml</a><a href="http://www.zeitronix.com/Products/zavt/zavt.shtml" target="_blank">http://www.zeitronix.com/Products/zavt/zavt.shtml</a>If you want to go another option, you might be able to take some really good measurements and construct this with a 3D printer. I&#039;m not familiar with what you can and cannot make with these.On a side note, is there anyway to make my display brighter? Thanks.</blockquote>

[QUOTE="Valhalla, post: 1803367, member: 25419"] Jason - I got a used and not working extra clock module from Shawn in Tampa. I think he gave it to me and all I had to do was pay for postage. I know there are others out there and perhaps someone might view this thread and donate one to you for this project. I only used the front frame and sides so that the unit would not blow out of the dash when I hit the go pedal! From there I used some left over plastic, glue and a little bondo to shape. Took a bit of time to get it where I want it but I'm still happy with how it works. I have the "naked" gauge and remote the control board back inside the opening. I also mounted the Zietronix alarm in the air vent and it is loud and a red light flashes. This alarm is totally programmable and I have it set to go of at 7500 rpm's and also if the turbos overboost. A very nice option. Here are the links to these two items; [URL]http://www.zeitronix.com/Products/LCD/LCD.shtml[/URL] [U][COLOR=#0066cc][URL]http://www.zeitronix.com/Products/zavt/zavt.shtml[/URL][/COLOR][/U] If you want to go another option, you might be able to take some really good measurements and construct this with a 3D printer. I'm not familiar with what you can and cannot make with these. On a side note, is there anyway to make my display brighter? Thanks. [/QUOTE]

Verification