Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Re: Re: My early Xmas present . Yeah too bad the instructions to follow on the template are wrong!! The template is off about 8mm . my suggestion is to cut out the caliper in the template, then cut out the rotor within the caliper and slide the paper caliper over your stock rotor to see if your current rim will clear, or to show how much of a spacer will be needed. Steve and I found this out. The correct way Stoptech says to use the template showed that his Antera's would fit, but they are NOT even close like I said over 8mm off. The template said they would clear without a spacer, but in reality they don't even clear with a 7.5mm spacer!!! The trick I describe will work though. Just cut the caliper out of the template and cut the rotor out and set on your stock rotor.Good Luck! P.S. I will also be buying these they are great for the price, and they DO have a staggered piston design like the Brembo to give even pad wear. Great job Stoptech!! Now just fix your template!
Re: Re: My early Xmas present .
Yeah too bad the instructions to follow on the template are wrong!! The template is off about 8mm . my suggestion is to cut out the caliper in the template, then cut out the rotor within the caliper and slide the paper caliper over your stock rotor to see if your current rim will clear, or to show how much of a spacer will be needed. Steve and I found this out. The correct way Stoptech says to use the template showed that his Antera's would fit, but they are NOT even close like I said over 8mm off. The template said they would clear without a spacer, but in reality they don't even clear with a 7.5mm spacer!!! The trick I describe will work though. Just cut the caliper out of the template and cut the rotor out and set on your stock rotor.
Good Luck! P.S. I will also be buying these they are great for the price, and they DO have a staggered piston design like the Brembo to give even pad wear. Great job Stoptech!! Now just fix your template!
