MOMO R hub horn wiring question please

[TANTO]

I did search, but couldn't find. About 15 years ago i converted to an R type wheel and made my own hub that uses the cable reel. Just decided to remove my entire SRS harness and thinking about pulling the cable reel and switching to the R horn scheme. I have an original honda R hub but i don't seem to have all the parts as there is no plunger type setup to ride along the brass ring on the bottom of the hub. I only have the hub itself. What am i missing? And where do i find the wire to hook to that runs back to the horn relay? TIA.

 

[TANTO]

If anyone is out there, i decided to simply stay with the cable reel. Since i just happen to have taken a picture of the modified cable reel, i though i'd post. You simply cut back the wires you don't need. Use a pinch connector on the wires you want and then shrink wrap that fragile connection to cable reel strip with about five layers of wrap to beef it up nicely. It's been working well for 15 years. Pic attached.

 

[OLDMNSX]

Way to go! Sometimes they just don't make the part that you need!