Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Two other tips:Rather than use a compass like device which I think is a waste of time & difficult to acquire & not necessarily precise, simply use the edge of the insulation baffle once you have removed as a template--since it is the exact shape & contour of the actual cover itself. All you have to do is trace one side, shift the template over & trace the other side.2. I used door edge molding available at Pep Boys in a long reel or two strips. Get the reel so you have one continuous piece to cover up the exposed edge cover once you cut out the center area. This will give it a clean factory look, no visible "raw" edge.3. Once epoxy or liquid nails adhesive holding the mesh is completely dry, press the mesh out from the underside & you get the mesh to bulge & slightly form a convex curve around the contour of the center from the top side.
Two other tips:
Rather than use a compass like device which I think is a waste of time & difficult to acquire & not necessarily precise, simply use the edge of the insulation baffle once you have removed as a template--since it is the exact shape & contour of the actual cover itself. All you have to do is trace one side, shift the template over & trace the other side.
2. I used door edge molding available at Pep Boys in a long reel or two strips. Get the reel so you have one continuous piece to cover up the exposed edge cover once you cut out the center area. This will give it a clean factory look, no visible "raw" edge.
3. Once epoxy or liquid nails adhesive holding the mesh is completely dry, press the mesh out from the underside & you get the mesh to bulge & slightly form a convex curve around the contour of the center from the top side.
