Looking for source of 1991 fuel injector connectros/plugs...

[TomCat]

Mine are cracking/old. I am looking for the piece that would splice into the two wires on the harness and has the little spring steel retainer to grab the injector.

Acura says its only part of the ($1500) harness. Acura said try NAPA...anybody have a part #?
Honda/Acura cross-reference/source?
Thanks,
Tom

 

[ekhonda87]

Pretty sure all OBD1 honda injector clips are the same.

 

[Jeff@Carbon6]

you want a "Bosch Style" connector.

 

[TomCat]

Thanks...do you have a part #?
I know the plug can only go on one way (groove)...but are the wires "interchangeable" (or is there a specific in/out or "polarity")?

 

[Jeff@Carbon6]

If you go into any parts store and ask for a replacement connector for a 2 wire Bosch style injector, they should be able to get you what you need. There are a few different manufacturers and styles of that connect. All will work. If you ask for a specific part number they may not stock that specific brand. Injectors operate like a solenoid so I do not think there is a polarity but most cars use a wiring system that is polarity specific. It would be best to replace them in the same polarity that they are originally orientated in.

 

[TomCat]

Copy all