Reply to thread

Message

I am not using the same LED bulbs. I contacted my seller and they have no clue when I asked about the amp ratings. All I have is they are 27 5050 SMDs on each bulbs and per their site, Each bulb is "2W"

I opened up the original ones I took out of my car and it seems to be the same as the one I purchased/modded.

Note I don't have that IC as in your picture. I also took a picture of it of the back...

By looking at the layout I assume the two "shunting resistors" are in series. Would it be an issue b/c I only replaced one of the shunt (picture above, lower left, toward the contacts) with the 0.12 Ohm, 1 watt resistor? Should I remove the other shunt and rewire the resistor mirroring yours?

Is it possible to disable the hyperflash completely?

Thank you for all your help with this. I am totally a newbie when it comes to electronic circuitry.

<blockquote data-quote="kennyc" data-source="post: 1808963" data-attributes="member: 22472">I am not using the same LED bulbs.&nbsp; I contacted my seller and they have no clue when I asked about the amp ratings.&nbsp; <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f641.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":(" title="Frown&nbsp; &nbsp; :("&nbsp; data-smilie="3"data-shortname=":(" />&nbsp;&nbsp; All I have is they are 27 5050 SMDs on each bulbs and per their site, Each bulb is &quot;2W&quot;I opened up the original ones I took out of my car and it seems to be the same as the one I purchased/modded. <img src="https://dl.dropboxusercontent.com/u/9372085/Cars/NSX/flasher-1.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />Note I don&#039;t have that IC as in your picture.&nbsp; I also took a picture of it of the back...<img src="https://dl.dropboxusercontent.com/u/9372085/Cars/NSX/flasher-2.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" />By looking at the layout I assume the two &quot;shunting resistors&quot; are in series.&nbsp; Would it be an issue b/c I only replaced one of the shunt (picture above, lower left, toward the contacts) with the 0.12 Ohm, 1 watt resistor?&nbsp; Should I remove the other shunt and rewire the resistor mirroring yours?Is it possible to disable the hyperflash completely?Thank you for all your help with this.&nbsp;&nbsp; I am totally a newbie when it comes to electronic circuitry.</blockquote>

[QUOTE="kennyc, post: 1808963, member: 22472"] I am not using the same LED bulbs. I contacted my seller and they have no clue when I asked about the amp ratings. :( All I have is they are 27 5050 SMDs on each bulbs and per their site, Each bulb is "2W" I opened up the original ones I took out of my car and it seems to be the same as the one I purchased/modded. [IMG]https://dl.dropboxusercontent.com/u/9372085/Cars/NSX/flasher-1.jpg[/IMG] Note I don't have that IC as in your picture. I also took a picture of it of the back... [IMG]https://dl.dropboxusercontent.com/u/9372085/Cars/NSX/flasher-2.jpg[/IMG] By looking at the layout I assume the two "shunting resistors" are in series. Would it be an issue b/c I only replaced one of the shunt (picture above, lower left, toward the contacts) with the 0.12 Ohm, 1 watt resistor? Should I remove the other shunt and rewire the resistor mirroring yours? Is it possible to disable the hyperflash completely? Thank you for all your help with this. I am totally a newbie when it comes to electronic circuitry. [/QUOTE]

Verification