JDM vs. U.S. Door..Please Help

[speedyizzy]

Hey gentlemen,

Some idiot backed into my passenger side door in a parking lot. Wasn't there to catch the guy, so I plan on repairing it out of pocket. I have a U.S. version NSX (obviously), and someone is selling me a JDM passenger side door. Giving my a great deal, includes all interior pieces, mirror, panel, window regulator (mines just went out) etc..Obviously the trim panel and switches wouldn't work out on my ride because JDM is right-hand drive...well here is the question?

Is the door shell the same?
Would I be able to use the JDM window and regulator?
What would not be compatible?

I want to go pick-it up this weekend...400 miles away...but I am anxious to get my ride back to primo condition. Responses will be greatly appreciated!!

Thanks a mil,

speedyizzy

 

[NemesisX]

I dont know if its all the same....In my opinion, the shell and regulator should work....The window maybe different due to safety but you might be able to switch it with your original

let me know what you plan to do with the JDM trim and switches..I might need them down the road...

 

[nsxhk]

I think other than the window regulator, it should be a simple swap.

JDM nsx are RHD so you have to do a little modification to the window/door switch.

Henry.

 

[MJK]

Some idiot backed into my passenger side door in a parking lot. Wasn't there to catch the guy, so I plan on repairing it out of pocket. I have a U.S. version NSX (obviously), and someone is selling me a JDM passenger side door.

USDM passenger = right side of NSX
JDM passenger side = left side of NSX

Be careful!

 

[JoeSchmoe]

You might have problems with the window regulator as stated before. The driver's side has the one-touch roll down feature, but the passenger does not. There may be an extra wire or the connector may be different on the regulator as a result -- so dig through the electrical wiring diagrams in the manual beforehand.

-- Joe