Interior Back Panel Clips

[Coz]

Does anyone know what the size of the clips that hold the interior trim back panels on the bulkhead are ?

As with the interfender liner clips, Nissans also work on the NSX and they are $7.00 for 25 from The Fastener Warehouse and not the $2.00 each from Acuca/Honda. Hoping to get these clips too from Fastener Warehouse.

 

[Coz]

There are 2 different types, need a Acura/Honda part # if anyone has them.

Does anyone know what the size of the clips that hold the interior trim back panels on the bulkhead are ?

As with the interfender liner clips, Nissans also work on the NSX and they are $7.00 for 25 from The Fastener Warehouse and not the $2.00 each from Acuca/Honda. Hoping to get these clips too from Fastener Warehouse.

 

[burbel]

GT5 that's great news, however, can you give us a particular part number of a link to the page to get these? I just removed the interior panels yet again, and noticed that I need a couple of those clips, as well.

 

[Coz]

You bet...here is the link for the inter fender liner clips.
http://www.thefastenerwarehouse.com/catalog/item/568361/214758.htm
You'll want Part # TR 126 for the inter fender liner clips. They are actually for a Nissan but are the same clips we use for the NSX and work perfectly.

I'm still working on getting the part numbers for the interior panel clips. Going by the Acura/Honda dealership today to get their part # so The Fastner Warehouse can see if they can match it.

GT5 that's great news, however, can you give us a particular part number of a link to the page to get these? I just removed the interior panels yet again, and noticed that I need a couple of those clips, as well.

 

[TomCat]

As with the interfender liner clips, Nissans also work on the NSX and they are $7.00 for 25 from The Fastener Warehouse and not the $2.00 each from Acuca/Honda. Hoping to get these clips too from Fastener Warehouse.

I need these for my Nissan...THANKS Coz/GT5

 

[Gary W]

These are the ones I use for the fender liner:

http://www.thefastenerwarehouse.com/catalog/item/568575/3799276.htm

Gary

 

[NSX PTY]

There are 2 different types, need a Acura/Honda part # if anyone has them.

You need part#91560-SM4-003 "CLIP, DOOR LINING" x3 for the RR. BULKHEAD UPPER LINING

the other clip is part#90668-SJ4-003 "CLIP, RR. TRAY" x8 but this is for the R./L. RR. CENTER BULKHEAD (just behind each seat).

Antonio

 

[eNeSeX 95T]

Are you talking about the 3 black clips that hold that thin panal behind the seats on. If so you need the ones with two rings close together. Something like this

http://www.thefastenerwarehouse.com/catalog/item/568575/214893.htm

 

[Coz]

Here's the part numbers for the other clips.

Rear Pillar Trim Panel: 90609 SG0 003
Rear Upper Trim Panel: 91560 SL4 003
L/R Rear Trim Panels: 90668 SJ4 003

Now to see if I can find the matches....

 

[Coz]

The clips for these panels have a split end so that the clip slides into the panel piece backing and stays there and then pushes into the bulkhead holes... More like this.
http://www.thefastenerwarehouse.com/catalog/item/568575/214900.htm

Are you talking about the 3 black clips that hold that thin panal behind the seats on. If so you need the ones with two rings close together. Something like this

http://www.thefastenerwarehouse.com/catalog/item/568575/214893.htm

 

[Coz]

I'm sending the 3 clips to Len at The Fastener Warehouse. He's going to see what he can do to match them for us...
Does anyone else have any clips we should try and find matches for so we can better prices for them than through the dealerships ?

 

[nsxman2001]

I'm sending the 3 clips to Len at The Fastener Warehouse. He's going to see what he can do to match them for us...
Does anyone else have any clips we should try and find matches for so we can better prices for them than through the dealerships ?

GT5

I'm still wondering if your talking about the panel that hides the ECU and the traction control ECU it has 3 clips that hold the panel? If so I'm in need of these clips too. I know the dealership price is alot for just one clip..

 

[Coz]

Yes. The upper panel take 3 clips, the 2 lower L/R panels take 4 each.

GT5

I'm still wondering if your talking about the panel that hides the ECU and the traction control ECU it has 3 clips that hold the panel? If so I'm in need of these clips too. I know the dealership price is alot for just one clip..