Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Yes, we're making custom software. I'm working the hardware end and finding the variables in the code while Quaraxkad is programming the user interface. Thanks man, I wish there was more interest in this kind of stuff, seems kind of dead in this section of the forum.I actually hooked up the NSX ECU tonight to the workbench, found the pads for TX and RX and soldered in standoffs. Hooked up the datalogging cable, and made some modifications to the chip and sure enough I'm getting valid responses from the datalogger!Heres a pic of the connections: JP2=TX on the left and L5=RX on the right.Here is a picture of the 84pin SMT socket I installed, I had to give myself a pat on the back for soldering that one successfully without an SMT rework station!-Matt
Yes, we're making custom software. I'm working the hardware end and finding the variables in the code while Quaraxkad is programming the user interface. Thanks man, I wish there was more interest in this kind of stuff, seems kind of dead in this section of the forum.
I actually hooked up the NSX ECU tonight to the workbench, found the pads for TX and RX and soldered in standoffs. Hooked up the datalogging cable, and made some modifications to the chip and sure enough I'm getting valid responses from the datalogger!
Heres a pic of the connections: JP2=TX on the left and L5=RX on the right.
Here is a picture of the 84pin SMT socket I installed, I had to give myself a pat on the back for soldering that one successfully without an SMT rework station!
-Matt
