Reply to thread

I just did this- it's not too hard, unless you want to get really fancy:


Take off the part to the left of the steering column, through which the A/C flows to the door- there should be screws exposed when the door is open. Run the cable from the fuse box through to the dashboard, right in front of the pillar- it should poke through. Pull the wire through- 4 or 5 feet worth.


I read that you can get the molding off the pillar, but I just used a popsicle stick to push the flat cable into the front side of the molding- it slid right in.


I did the same thing with the top piece- it just slides right up under the molding. Leave enough hanging to get to the mirror, of course.


Back
Top