Installation of fog lights and using factory plugs and wires. Help

Joined
11 December 2008
Messages
564
Location
New Hartford, NY
Hey guys. I tried doing research on installation of the oem fogs by using oem plugs that are there and were i can hook up the switch in the center console like the jdm cars are and the euro. Cars.

Is it possible to install them with me using the plugs that are there and plug the switch in if i ought it from science of speed or deli. Racing?

I know i would probably need to add a fuse or relay. Anyone has any info or pics of the install or is it not possible?


This prob. Was asked before but i could not find any forums on it.


Thanks for any info guys.
 
Last edited:
Some one has done it using the plugs, I have searched for the thread but can't seem to find it. If I remember, the plugs are wired to a relay box (the long rectangular one). under hood, front passenger side, nearest the radiator There are two blank spaces in there for relays. no wiring exists from there to inside the car. Hopefully someone who can search better than I can find the post.
 
Voici un lien pour avoir techniques livre NSX Europe, le circuit électrique des feux de brouillard sont inclus, attention, ce document fait 350 Mo: smile:
here a bond to have technical book NSX Europe, the electrical circuit of the foglamps are included, attention, this document makes 350 Mo

http://www.megaupload.com/?d=K1MH8A12
 
Last edited:
Back
Top