huge DIY project tomoro needs some answers

[nsxtcy85]

My biggest question is when installing my Modified comptech exhaust and headers. For a 91-94 nsx. Am I going to need any adapter pipes I see people ask about? or is that for 95-99 or 02+?

Second any write ups on header install. This looks like it is going to be a Bxxch.

Also installing the new clutch master, slave cylinder, oil pressure sensing unit and Zex wet nitrous kit with the BKR7E-11 plugs (well not the same ones advance showed a new part number for them)

 

[Stephen@NCAutoUSA]

My biggest question is when installing my Modified comptech exhaust and headers. For a 91-94 nsx. Am I going to need any adapter pipes I see people ask about? or is that for 95-99 or 02+?

Second any write ups on header install. This looks like it is going to be a Bxxch.

Also installing the new clutch master, slave cylinder, oil pressure sensing unit and Zex wet nitrous kit with the BKR7E-11 plugs (well not the same ones advance showed a new part number for them)

There's a few nice DIY header installs floating around, I have one or two saved as favorites on my other computer. If no one sends them, or you find them, I'll send you them tomorrow night when I get back into the city.

Stephen

 

[nsxtcy85]

There's a few nice DIY header installs floating around, I have one or two saved as favorites on my other computer. If no one sends them, or you find them, I'll send you them tomorrow night when I get back into the city.

Stephen

Hey thanks. Any info on if I will need pipes to install these headers and exhaust?

 

[Larry Bastanza]

http://www.nsxprime.com/FAQ/DIY/headers.htm

http://www.nsxprime.com/forums/showthread.php?t=34999

HTH,
LarryB

 

[NSXclear]

From what I recall, you will not need adapter pipes for you install.

Here is a few links for header install:

http://www.nsxprime.com/forums/showthread.php?t=52113

http://www.nsxprime.com/FAQ/DIY/headers.htm

http://www.nsxprime.com/forums/showthread.php?t=74785

 

[nsxtcy85]

Thanks guys your awesome!

 

[nsxtcy85]

Installed the Master, slave cylinder, and oil pressure sensor. The car gets into gear better for sure and the oil pressure doesnt tweak out anymore.

Also changed the fluid over to the GM synchromesh. I havente noticed a difference in first 10 miles.

The "modified" Comptech exhaust is also installed. (straight pipes) where the blown muffler was. Its loud but I like it. Atleast for now. Its much better than stock thats for sure. Now I need to set a weekend aside for those headers lol.

 

[nsxtcy85]

Here are some pics of the exhaust. Im only doing testing right now as I plan on swapping out the pipes for numerous different mufflers and resonators to test sounds. I will get a clip up soon. Its very loud but I have recieved alot of compliments.

 

[nsxtcy85]

<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/z3WuCUv0aUk"> </param> <embed src="http://www.youtube.com/v/z3WuCUv0aUk" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

Vid of the straight pipe comptech. With cats and stock headers

 

[Jap4RE]

congrats on the install still looks like you need a bit of fitment on the exhaust though

oh and fyi the exhaust will get considerably louder with the addition of the headers, so beware if you are concerned with the current noise levels.

 

[nsxtcy85]

I actually going to be fixing the left tip and selling the exhaust to someone whose looking for a track exhaust or someone who lives in a state like Ohio with no inspection. Its very loud and you wont get a more free flowing exhaust.