How to Reset TCS???

Joined
30 October 2000
Messages
4,249
Location
Houston, TX
Well, I had a problem with my TCS along time ago that turned out to be my Main Relay. Since then, I’ve been driving around with no fuse = no TCS. Recently I put the TCS fuse back into the fuse box to re-active the TCS. Now everything with the TCS is functioning properly as it should.

But, when I choose to disable the TCS by the simple press of the “TCS button”, it does not disable. When I push the button, neither the light on the button, nor any lights on the gauge cluster activate. So, to disable my TCS now, I have to physically remove the fuse, or pull my parking brake up 2 clicks until TCS and ABS are turned off.

So, what could be the problem? Do I need to reset the TCS system some how? Your thoughts please…

Thanks,
- Z
 
Give your Ebrake a couple of clicks and drive for about a minute but not faster than 20MPH, that should disable TCS. Shut the car down and restart. TCS should be activated after your restart. Also check the multi pin connector on the dash behind the TCS switch, they shake loose sometimes.

Armando
 
Back
Top