My keyless remote control does not work possible due to the fuse. But, I don't know how to remove it. Please give me some help.
thank you
thank you
How to remove the bottom cover under glove compartment?
- Thread starter drtruong
- Start date
There are two screws that need to come out. One on each end.
Then you pull diagonally down. there are pressure clips that hold it in place.
Once those clips pull out, then pull out. There is a pin at the back that slides into a slot.
There should be a rubber bushing on the pin to stop it from rattling.
Then you pull diagonally down. there are pressure clips that hold it in place.
Once those clips pull out, then pull out. There is a pin at the back that slides into a slot.
There should be a rubber bushing on the pin to stop it from rattling.
After I took the 2 screws out that mounted the box, I did not see any clips that you described. However, I unplugged and plugged back the connection. Voila...... it works again. It must a loose connection. I still want to know ..... is there any fuse around that area or all connected to the fuse box at the driver side?
shawn110975
Suspended
on the harness you unplugged there is a fuse about in the middle of the harness
Wow, I did not know that and I did not see any fuse in the harness. Maybe I did not look carefully. thank you
Similar threads
