Smart to make sure we are all on the same. This is the relay that I think is the high beam...when removed...high beams turn off. Removing it changes none of the other functions in any of the key states.
[ATTACH=full]198658[/ATTACH]
#2
Verified....accessory = no headlights automatically coming on (low or high) zero state change.
-----------------------------------------
#3
The low beams come on as soon as the key is turned to ON without starting the car
-----------------------------------------
#4
E-brake status plays zero role in lights behavior
-----------------------------------------
#5
Yes...with headlights turned off and the key cycled on / off = clicking in relay
Key turned to on....THEN cycling the headlight controls = no additional clicking of that relay
However the reverse is NOT true.
If I first set headlights to low beam on there is one initial click at the relay
but when I cycle key from off to ON there is an additional click in that relay
-----------------------------------------
#6
Headlight switch off, lo beam relay removed ignition turned to on = no lights coming on.
-----------------------------------------
#7
Didn't come on so NA
-----------------------------------------
#8
Headlights on / key off = when I pull fuses the corresponding headlight turns off
Headlights off / key on = when I pull fuses the corresponding headlight turns off
-----------------------------------------
#9
Yes the relay is required for the DRL to work
That is correct.....and also my assumption.
Once again for clarity the relay situation is odd....see response to #5 above
Also thanks again for the time to help an internet stranger out with this level of detail!
