How to adjust headlight covers?

Joined
28 December 2005
Messages
426
Location
Portland, OR
I noticed the driver side has a bit more gap than the passenger side. Will appreciate if you can point me to the instructions to make some fine adjustments.

Thanks.
 
There are 4 nuts that hold the whole headlight you need to jack up the car remove fender liner and loosen the 4 nuts adjust the headlights hold it and get someone else to go underneath and tighten it.
 
You have to pop up the headlight and there are 4 screws holding the cover, 2 on each side. Loosen those screws and you just have to play around positioning the cover.

I noticed the driver side has a bit more gap than the passenger side. Will appreciate if you can point me to the instructions to make some fine adjustments.

Thanks.
 
Thanks will try this weekend.
 
Back
Top