HID kit for nsx used great shape works perfectly $350 plus shipping
ok here is a pic this kit was installed on my nsx and yes it is the proper bulb to snap into the housing with no modifications. for electrical connections you need to ground the black wire and insert the red wire with the pin on it into the stock bulb plug that is hot for the low beam. the ballast tucks up nicely and can be done with double sided tape. these were on the car when I got it. I have been told the kelvin rating of the bulbs is 7000k by the shop that did the install. ballast brand is xtec kit is probably less than 2 years old but in that time I believe the car was hardly driven maybe 2000 miles at most. I will power up the lights and take a pic for anyone that decides to purchase the kit. please respond to [email protected] as I don't have time to get on the forum alot. thanks
[email protected]
ok here is a pic this kit was installed on my nsx and yes it is the proper bulb to snap into the housing with no modifications. for electrical connections you need to ground the black wire and insert the red wire with the pin on it into the stock bulb plug that is hot for the low beam. the ballast tucks up nicely and can be done with double sided tape. these were on the car when I got it. I have been told the kelvin rating of the bulbs is 7000k by the shop that did the install. ballast brand is xtec kit is probably less than 2 years old but in that time I believe the car was hardly driven maybe 2000 miles at most. I will power up the lights and take a pic for anyone that decides to purchase the kit. please respond to [email protected] as I don't have time to get on the forum alot. thanks
[email protected]
Last edited:
