HID Kit Installation HELP PLEASE....

[Viewfromtheback]

I just purchased a McCulloch. Brand new /w 6,000K 9006 bulbs. Last night I installed everything as the manual said, did notget the lights to come on. Has this happened to anyone,any trouble shooting suggestions?

 

[THonda]

check the fuse first, sometime HID kit will need a higher amp fuse.

now check your wiring, mostly likely you need to reverse the wires that gets connected to your stock headlight harness.

if you are using a relay make sure you have wired it up correctly.

 

[donwon]

ON that kit, you need to reverse the wires, so white and black are reversed. So connect white to black, and black to white insdie the housing.

 

[Viewfromtheback]

reversing wires

Don,

Thanks for the info, so you are saying that the stock fuses work

reverse the wires from the original OEM harness not the HID harness....Correct....

 

[VBNSX]

ON that kit, you need to reverse the wires, so white and black are reversed. So connect white to black, and black to white insdie the housing.

I wish I could say that was true... but when I wired mine up, black went to black....

-x-

 

[donwon]

You had the mcculloch kit?

I wish I could say that was true... but when I wired mine up, black went to black....

 

[Viewfromtheback]

HID

Thanks for the help Donwon..... Reversing the wires worked and the kit is amazing...... A little tricky to get the dusk caps right, but it worked out

 

[donwon]

Glad it all worked out!

 

[VBNSX]

You had the mcculloch kit?

yup