Headlights washing system

[midNight Sun Xpress]

I have ordered a nose mask which is US type. There are no holes premade for the water outlet of the headlights washing saystem. Where do I get access to the hoses for disonnecting and reinstalling the outlet on top of my nosemask? (Remove the headlights?)
Also looking for good ideas for covering the holes for sidemarker-lights which I do not have on my "euro"-model NSX.

------------------
Have a Honda-experience every day!

Jon
'91 NSX for summer & '97 CR-V for winter

 

[j14nsx]

Hi,

The nose cover has to come off to remove the headlight washers. There is a metal clip underneath the cover which holds them on. I took the bumper off once with the beam and everything in one piece. I don't know if the cover comes off by itself. It's quite a job to do just to get the washers on top of the nose mask, easier to cut holes!

Kevin

 

[DutchBlackNsx]

Kevin is right, the whole bumper has to come off (nightmare!!!), and then you have to disassemble the whole thing to get to the metal clips, which holds those nozzles in.

The major pain is not to scratch the paint when you have the bumper off.....


Mich

 

[midNight Sun Xpress]

Thanks, both of you.
That was my first idea, but had a hope that Honda did make an easier access to the hoses.
I'll sharpen my scalpel and try to make neat cuts then.....


------------------
Have a Honda-experience every day!

Jon
'91 NSX for summer & '97 CR-V for winter