i have searched and found no info on headlight adjustment. can anyone please help me with this? I have just installed a hid system and need to adjust the beam.
thanks,
chris
thanks,
chris
Headlight adjustment
- Thread starter fcs1965
- Start date
The service manual is here:
http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991_svcman.htm
Page 23-187
HTH,
LarryB
http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991_svcman.htm
Page 23-187
HTH,
LarryB
fcs1965 said:
I tried the adjustment screw, but have no success. Please let us know which direction to turn to move the aim higher.
Did you have some aiming issues after the HID installation?
Thanks.
I too had to do major adjustments after my HID fit on my '92. I found the adjusters were all stiff and very difficult to adjust. I had to take them out of the housing and clean them up with WD 40 and reassemble. Then , I could adjust them but it is a pain! See service manual for location and be patient- it takes a lot of turns to move the assembly.
Jh
Jh
jh_nsx said:
which direction do you turn to move the aim higher? Were you able to move it up a lot?
did you have to adjust both side? My passenger side went way low after the HID. The driver side seems to be OK. Don't know why one side became low after the HID????
Read my post here: http://www.nsxprime.com/forums/showpost.php?p=264179&postcount=7
I don't recall which way is up/down or left/right but once you solve the worm gear problem and can freely turn the adjuster nut you'll know right away which way to turn to get the desire result.
There's a good article on how to correctly the headlights here.
I don't recall which way is up/down or left/right but once you solve the worm gear problem and can freely turn the adjuster nut you'll know right away which way to turn to get the desire result.
There's a good article on how to correctly the headlights here.
Similar threads
