front wheel hub bearing assembly

[nikey22]

Hi,

does anyone know if acura sells the hub/bearing assembly together? I don't have a press and I can't purchase these separately. It would be a whole lot easier to replace this thing as a unit, picture included.

What is the part number if its possible, thanks!

 

[Larry Bastanza]

Sorry, it is sold in two parts only from Acura:

44200-SL0-008 BEARING ASSY., FR. HUB UNIT
44600-SL0-020 HUB, FR. AXLE

You can pay to have it pressed, any auto machine shop can do this easily. I am sure it would be inexpensive.

HTH,
LarryB

 

[CB169]

Hi,

does anyone know if acura sells the hub/bearing assembly together? I don't have a press and I can't purchase these separately. It would be a whole lot easier to replace this thing as a unit, picture included.

What is the part number if its possible, thanks!

I replaced mines about 6 years ago and it cam just the way it is in your pic with the bearing it was a very easy bolt on procedure with no pressing, check this link
http://images.google.com/imgres?img...&prev=/images?q=44600-SL0-020&um=1&hl=en&sa=N

 

[Larry Bastanza]

I replaced mines about 6 years ago and it cam just the way it is in your pic with the bearing it was a very easy bolt on procedure with no pressing, check this link
http://images.google.com/imgres?img...&prev=/images?q=44600-SL0-020&um=1&hl=en&sa=N

CB169,

Did you get it aftermarket? The reason I ask is the pic you reference clearly shows it as two parts #4 and #7, this is the same reference I used in my comments above.

Regards,
LarryB

 

[RON98]

side hammer should do the trick or a snapon gear puller.

i believe you can rent a slide hammer from pepboys or autozone.

 

[CB169]

CB169,

Did you get it aftermarket? The reason I ask is the pic you reference clearly shows it as two parts #4 and #7, this is the same reference I used in my comments above.

Regards,
LarryB

Now that I think about it.......it was the front bearing and not the rear, (no pressing for the front), Slide hammer like RON98 said

 

[davidf]

Here, save yourself some money. http://www.nsxprime.com/forums/showthread.php?t=101125

 

[RON98]

Now that I think about it.......it was the front bearing and not the rear, (no pressing for the front), Slide hammer like RON98 said

slide hammers work with pressed on hubs also. :wink: its magic.