Hello everyone, I have two items for sale:
-[SOLD] Foundry3 K-Series Coil Conversion +6x K-Series Coil Packs (Used) [SOLD]
-Procar Specials Cruise Control Kit (Basic Kit) (Brand New) [Still Available]
[SOLD] The Foundry3 K-Series Coil Conversion w/6x K-Series Coil Packs [SOLD] (Used) - 450 USD Shipped (or best offer) to anywhere in the USA or EU
This kit is designed for aftermarket ECU's only. Used for approximately 3000 miles and am only selling because I am moving onto a J-Series build... I therefore no longer have a use for this kit. It really served me well and would be perfect for those of you on standalone ECU. This kit really helped my tuner become more precise with the tune as compared to the old aging-technology, less-precise, Coil Packs whose replacement price due to increasing rarity alone, would far exceed the price of my offering here... sometimes with half of the coils reaching prices of ~250 USD per coil for one of the banks.
Details of the product from Foundry3 himself can be found here:
https://www.foundry3studios.com/product/7nsx-k-coil-swap-kit
This kit was used for approximately 3000 miles and optioned out to the $479.99 version as seen on the site linked above.
My offering comes with the wiring harness and K-Series Coil Pack Adapters in billet aluminum, along with the new improved and redesigned relocation/mounting tabs not originally pictured on the site or available with the original kit. This new and improved mounting hardware has been redesigned for additional strength and improved metallurgy properties. (See photo of the single black relocation tab next to the plastic hardware bag in the top right corner for reference). 8x total tabs are included (I originally bought myself a couple extra for insurance just in case). These mounting tabs are brand new, purchased separately, and never used because I never had the opportunity to swap them in to replace the originals before I pulled the whole C30A out to change directions to a J35a3 build.
Additionally, I am including 6x P/N 30520-RRA-007 Denso Coils that the foundry3 kit did not come with (sold separately as buyer's responsibility to source) worth $420 USD new, (understanding that these are in used and in very good condition for approximately 3000 miles and my total price reflects this).
Of course the original instructions are included as well.
Procar Specials - Cruise Control (Basic) (NEW and Unused) 450 USD Shipped (or best offer) to anywhere in the USA or EU.
Brand new, never used. I am selling because when I made the update from my previous AEM v1 standalone to AEM infinity 506, I lost the ability to use my cruise control. I didn't realize this was a limitation of the AEM infinity 506, so could never install this kit... anyway my loss is your gain. Original brand new price is 600 EUR (626.62 USD at the time of this writing).
Details of his product can be found here on this prime thread:
https://www.nsxprime.com/threads/cr...ring-wheels-design-by-procar-specials.220116/
This beautiful kit has unmatched carbon fiber quality that only Detlef has been able to provide to the NSX community over the many years. You would really have to see the quality in person because the photos don't do it justice. I actually saw this kit installed in-person on Detlef's personal car in Germany and I knew I had to have it at that moment.
Reference photos of the kit installed on the Procar NSX! (attached to base of QD setup)
Reference installed photo of wheel removed from car.
Included are:
-Detlef's installation guide (details hidden in photo to protect his potentially proprietary wiring scheme)
-Procar Specials Cruise Control Basic Kit (worth 600 EUR + shipping)
-All necessary wiring Detlef provides in his kit
-The carbon fiber hub/switch panel
-2x momentary push-buttons
-rubber cover parts which cleanly hide the wiring behind the momentary switches
Noted Discrepancy: Detlef's original ad says the kit comes with (I think) the hub screws. My kit did not come with this, and your screw length may admittedly change based on your own mounting solution. But if you're doing some aftermarket setup, you should already have the hardware necessary or know how to source the appropriate 6x steering wheel/hub screws to accommodate your specific solution.
Other notes, this kit relies on the clock spring harness for wiring, so if you removed it, for example on an NSX-R Hub conversion, this might not make the installation as easy.
Please PM me for details. The holiday season in the US is quickly approaching, so after mid-december or so, I may not be able to ship this out to you until coming back from some holiday vacation after the new year.
If you want to make my life easy and buy both, I'll give the two to you as a package deal for 800 USD shipped (anywhere in the US or EU).
-[SOLD] Foundry3 K-Series Coil Conversion +6x K-Series Coil Packs (Used) [SOLD]
-Procar Specials Cruise Control Kit (Basic Kit) (Brand New) [Still Available]
[SOLD] The Foundry3 K-Series Coil Conversion w/6x K-Series Coil Packs [SOLD] (Used) - 450 USD Shipped (or best offer) to anywhere in the USA or EU
This kit is designed for aftermarket ECU's only. Used for approximately 3000 miles and am only selling because I am moving onto a J-Series build... I therefore no longer have a use for this kit. It really served me well and would be perfect for those of you on standalone ECU. This kit really helped my tuner become more precise with the tune as compared to the old aging-technology, less-precise, Coil Packs whose replacement price due to increasing rarity alone, would far exceed the price of my offering here... sometimes with half of the coils reaching prices of ~250 USD per coil for one of the banks.
Details of the product from Foundry3 himself can be found here:
https://www.foundry3studios.com/product/7nsx-k-coil-swap-kit
This kit was used for approximately 3000 miles and optioned out to the $479.99 version as seen on the site linked above.
My offering comes with the wiring harness and K-Series Coil Pack Adapters in billet aluminum, along with the new improved and redesigned relocation/mounting tabs not originally pictured on the site or available with the original kit. This new and improved mounting hardware has been redesigned for additional strength and improved metallurgy properties. (See photo of the single black relocation tab next to the plastic hardware bag in the top right corner for reference). 8x total tabs are included (I originally bought myself a couple extra for insurance just in case). These mounting tabs are brand new, purchased separately, and never used because I never had the opportunity to swap them in to replace the originals before I pulled the whole C30A out to change directions to a J35a3 build.
Additionally, I am including 6x P/N 30520-RRA-007 Denso Coils that the foundry3 kit did not come with (sold separately as buyer's responsibility to source) worth $420 USD new, (understanding that these are in used and in very good condition for approximately 3000 miles and my total price reflects this).
Of course the original instructions are included as well.
Procar Specials - Cruise Control (Basic) (NEW and Unused) 450 USD Shipped (or best offer) to anywhere in the USA or EU.
Brand new, never used. I am selling because when I made the update from my previous AEM v1 standalone to AEM infinity 506, I lost the ability to use my cruise control. I didn't realize this was a limitation of the AEM infinity 506, so could never install this kit... anyway my loss is your gain. Original brand new price is 600 EUR (626.62 USD at the time of this writing).
Details of his product can be found here on this prime thread:
https://www.nsxprime.com/threads/cr...ring-wheels-design-by-procar-specials.220116/
This beautiful kit has unmatched carbon fiber quality that only Detlef has been able to provide to the NSX community over the many years. You would really have to see the quality in person because the photos don't do it justice. I actually saw this kit installed in-person on Detlef's personal car in Germany and I knew I had to have it at that moment.
Reference photos of the kit installed on the Procar NSX! (attached to base of QD setup)
Reference installed photo of wheel removed from car.
Included are:
-Detlef's installation guide (details hidden in photo to protect his potentially proprietary wiring scheme)
-Procar Specials Cruise Control Basic Kit (worth 600 EUR + shipping)
-All necessary wiring Detlef provides in his kit
-The carbon fiber hub/switch panel
-2x momentary push-buttons
-rubber cover parts which cleanly hide the wiring behind the momentary switches
Noted Discrepancy: Detlef's original ad says the kit comes with (I think) the hub screws. My kit did not come with this, and your screw length may admittedly change based on your own mounting solution. But if you're doing some aftermarket setup, you should already have the hardware necessary or know how to source the appropriate 6x steering wheel/hub screws to accommodate your specific solution.
Other notes, this kit relies on the clock spring harness for wiring, so if you removed it, for example on an NSX-R Hub conversion, this might not make the installation as easy.
Please PM me for details. The holiday season in the US is quickly approaching, so after mid-december or so, I may not be able to ship this out to you until coming back from some holiday vacation after the new year.
If you want to make my life easy and buy both, I'll give the two to you as a package deal for 800 USD shipped (anywhere in the US or EU).
Attachments
Last edited:
