Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
What size nozzle did you end up using?Devil's Own has 63cc/min nozzles if you need a very small nozzle.We were spraying about 400cc/min before the blower and could barely keep the IATs in the 130-140* range, added the plate and I used two 126cc/min nozzles and run the pump at about 70-80% duty with a 3PSI start. The smaller nozzles flow about 200cc/min together in this configuration but the spray mist is so fine compared to the larger single nozzle we were using before. I am certain that the two smaller nozzles is the way to go when spraying after the blower discharge. There is so little time to mix in with the charged air before it is consumed and the smaller droplets offer a much better mix than the larger nozzle would allow for.Dave
What size nozzle did you end up using?
Devil's Own has 63cc/min nozzles if you need a very small nozzle.
We were spraying about 400cc/min before the blower and could barely keep the IATs in the 130-140* range, added the plate and I used two 126cc/min nozzles and run the pump at about 70-80% duty with a 3PSI start. The smaller nozzles flow about 200cc/min together in this configuration but the spray mist is so fine compared to the larger single nozzle we were using before. I am certain that the two smaller nozzles is the way to go when spraying after the blower discharge. There is so little time to mix in with the charged air before it is consumed and the smaller droplets offer a much better mix than the larger nozzle would allow for.
Dave
