anyone have a page on removing the front and rear fenders. didnt see it in the service manual
fender removal
- Thread starter Hksdrager7
- Start date
I cant believe that there is not service manual that shows how to remove the fenders. Even the newer manuals no not show you.
shawn110975
Suspended
remove both rear fender liners, then remove rear bumper,
the side rocker panels, then remove side vent, then remove
the upper exterior B pillar cover( bend down the head liner then there
are two screws on the inside of the car which hold the exterior
pillars on top and bottom )then there are 10-11 bolts to remove the rear
fender. maybe more I dont remember.
a few more bolts for the driver side as it has the gas tank entry point
the side rocker panels, then remove side vent, then remove
the upper exterior B pillar cover( bend down the head liner then there
are two screws on the inside of the car which hold the exterior
pillars on top and bottom )then there are 10-11 bolts to remove the rear
fender. maybe more I dont remember.
a few more bolts for the driver side as it has the gas tank entry point
Last edited:
11 bolts for each rear quarter, and the NSX body manual does show the location of all the bolts...
it does? could you tell me what page please. Does it show torque? thanks mate
page 97 in the body repair manual. its shows the locations of all 11 bolts. 7 ft lbs.
thanks mate
no problem. glad to help.
Similar threads
