Fender clips

[NetViper]

I need some new fender clips, I went to Honda and they wanted $1.50 for one, I found 40 for $7.74 on amazon.

Anyone else using these?

http://www.amazon.com/Push-type-Fas...1378730226&sr=8-1&keywords=honda+fender+clips

 

[chudson1549]

http://http://www.nsxprime.com/forum/showthread.php/170837-Plastic-rivets?highlight=Fender+liner+clips
I think they are the same

 

[shawn110975]

I hate them...... after they get some heat to them they brittle and break off..... so everytime I go ot the junk yard I inscrew 300 or so before i leave they dont even change me for them but some people cant go to the junk yard like me so here is 40 for 7.00 on ebay

you can re-use them
http://www.ebay.com/itm/US-New-Blac...1993|Model:Accord&hash=item58a4371cf2&vxp=mtr

over and over again.

 

[NetViper]

I hate them...... after they get some heat to them they brittle and break off..... so everytime I go ot the junk yard I inscrew 300 or so before i leave they dont even change me for them but some people cant go to the junk yard like me so here is 40 for 7.00 on ebay

you can re-use them
http://www.ebay.com/itm/US-New-Blac...1993|Model:Accord&hash=item58a4371cf2&vxp=mtr

over and over again.

Those fit and 8mm hole vs. the other is a 10mm hole. Which do we need?

I measured and it looks like 8mm.

Maybe these.

http://www.amazon.com/gp/product/B0...=301&pf_rd_p=1263465782&pf_rd_i=91545-SEO-003

 

[TURBO2GO]

I need these too whichever is a good solution.

 

[ky650]

I ordered these ones which seem to work well enough:
http://www.amazon.com/gp/product/B008427CZ2/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1

They seem to be similar to Shawn's but who knows if they're actually the same. The screws have a little nub on them from the injection molding which is rather annoying so I had to clip them off (easy). They don't really screw in per se, but they do press fit in nicely and "screw" out for reuse. Shipping time was reasonable as well.

 

[Quix-Draw]

I agree with Larry (from another fender-clip post)... I've had better luck with Acura part clips (91545-SE0-003) over the "same" Aveco part. Aveco's for me never gave the positive "lock" or "click" into place and end up falling out. I just bite the bullet and have a couple on hand.
On another note, I'm lowered, and need a low profile head on the clip since one is at the 12 o'clock position in the wheel well. That said, another type of clip with a broader head and more positive click may work.

 

[Hapa88]

I got mine off eBay per someone's recommendation here. I paid $6 shipped for a pack of 25.
This was the title of the listing:
"25 Pack Honda & Nissan Push-Type Retainer 63848-01G00"

 

[scammy]

I got mine off eBay per someone's recommendation here. I paid $6 shipped for a pack of 25.
This was the title of the listing:
"25 Pack Honda & Nissan Push-Type Retainer 63848-01G00"

yeah i got these ones work real well, shipped to NZ within a couple of days